Printable Push Rivets, Car Trim Clips & Hole Plugs + Sorting Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable push rivets & car trim clips + sorting box: fir tree, snap rivet, grommet, clip nut, hole plug, bumper.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
54 printable plastic fasteners for car trim, panels and furniture, stored in a box with 8 removable bins. Every bin has 6 compartments with raised size labels. The lid has an engraved title.
Types
PUSH RIVET – body + pin. Push the pin in and the legs spread (hole Ø5–10)
FIR TREE CLIP – trim and door panel clip (hole Ø5–10)
SNAP RIVET – one-piece, split legs with a barb (hole Ø5–10)
SCREW GROMMET – a self-tapping screw spreads the legs (hole Ø5–10)
SQUARE CLIP NUT – for square holes 6×6 to 12×12, takes a self-tapping screw
HOLE PLUG – snap-in blanking plug (Ø6–16)
PUSH-IN BUMPER – stopper for hoods, doors and cabinets, print in TPU (hole Ø5–10)
PUSH NUT – starlock washer pressed onto a smooth shaft (Ø3–10)
Printing
PETG or ASA (ASA for parts in the car – it handles heat and UV), 100 % infill, 0.15–0.2 mm layers, no supports. Parts print head-down as supplied.
Bumpers in TPU 95A.
Box, bins and lid: PLA or PETG, 0.2 mm, 15 % infill. The lid prints face-down, and a text inlay is included for two colours.
Fits panels up to about 2–3 mm. Print one piece first and check it against your hole.
Designed & built by Ing. TULák
GitHub: https://github.com/davidvancl
Printed it? Share a Make! Questions or ideas? Drop them in the comments.
Thanks for printing – may your trim panels never rattle again!