1 / 10
Full Desk Set - 7 Pieces | H3C Desk Collection — zdjęcie 1
1 / 10

Full Desk Set - 7 Pieces | H3C Desk Collection

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

All 7 NINE TOOLS desk pieces in one file per texture, packed on plates for the H3C and for small printers.

Ocena
0 / 5
Polubienia
4
Pobrania
8
Wydruki
0
Wyświetlenia
79
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Standard Digital File License

The whole NINE TOOLS H3C Desk Collection in one download. Pick a texture, open one file, and every piece is already laid out on its plates: pen cup, desk bin, catch-all tray, cable dock + 10 clips, phone stand, desk caddy and the 4-part headphone stand.

Why get the set

  • One file per texture and printer: no hunting for 7 separate downloads.

  • H3C: 3 packed plates (desk caddy + pen cup + phone stand + cable dock and clips / desk bin + catch-all tray / headphone stand).

  • All printers: 7 plates, one piece per plate, built on the A1 mini (180 mm), so it opens on any Bambu printer.

  • 2-colour H3C version: the NINE TOOLS emblem inlay is already set to filament 2, with the prime tower placed clear of every part.

  • Three textures, one family: DUNE (sand ripples), HIVE (hexagons that shrink toward the rim) and NINE (architectural flutes).

  • Support-free, seam on the back, and every plate slices with no warnings.

Print profiles (sliced in Bambu Studio)

  • DUNE - 2 colours (NINE TOOLS inlay) - H3C - PLA: 3 plates, 22.0 h, 1090 + 19 g

  • DUNE - 1 colour - all printers - PLA: 7 plates, 26.9 h, 1056 g

  • HIVE - 2 colours (NINE TOOLS inlay) - H3C - PLA: 3 plates, 26.3 h, 1062 + 19 g

  • HIVE - 1 colour - all printers - PLA: 7 plates, 32.5 h, 1028 g

  • NINE - 2 colours (NINE TOOLS inlay) - H3C - PLA: 3 plates, 30.9 h, 1070 + 19 g

  • NINE - 1 colour - all printers - PLA: 7 plates, 35.1 h, 1036 g

Print settings

  • Material: PLA (Bambu PLA Basic). 0.4 mm nozzle, 0.20 mm layers, 3 walls, 15% infill, Textured PEI plate.

  • No supports. The two headphone masts get a 5 mm brim (already set).

  • Print plate by plate. You can skip any plate if you only want some pieces.

Assembly

  • Headphone stand: press the lower mast onto the base, then the upper mast (badge to the front), then the arched arm.

  • Cable dock: stick the clips where your cables run.

  • Everything else is one piece and ready to use.

Single pieces

Want only one piece, the STLs or full details? Each one has its own page:

If this tidies up your desk, a Like or a Make with a photo really helps. Tell me which texture you printed!

Note: the photos in this gallery are photorealistic renders made from these exact print files. They will be replaced with photos of the real print soon. Original design. Not affiliated with Bambu Lab.

Tagi