JBL A704 amplifier holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
JBL A704 holder with vertical or horizontal slide mounts. Secures the amp with two long M5 through-bolts and nuts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- GNU General Public License v3.0
A holder for the JBL A704 amplifier, with mini slide brackets that can be installed vertically or horizontally to suit the setup.
The holder measures 160 × 70 mm. Secure the amplifier with two long M5 through-bolts and nuts at the ends. I recommend bolts at least 40 mm long. Attach the holder to the mini slide brackets with M4 screws at least 20 mm long.
The JBL Concert A652 may also fit: its published width and height match the A704, but it is 70 mm shorter. This fit has not been tested. Check the M5 mounting-hole alignment and clearances before relying on compatibility.
Printing
Material: PETG (CR PETG)
Nozzle / bed: 250 °C / 80 °C
Layer height: 0.2 mm
Wall loops: 2
Infill: 15% Gyroid