JBL A704 amplifier holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
JBL A704 holder with vertical or horizontal slide mounts. Secures the amp with two long M5 through-bolts and nuts.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- GNU General Public License v3.0
A holder for the JBL A704 amplifier, with mini slide brackets that can be installed vertically or horizontally to suit the setup.
The holder measures 160 × 70 mm. Secure the amplifier with two long M5 through-bolts and nuts at the ends. I recommend bolts at least 40 mm long. Attach the holder to the mini slide brackets with M4 screws at least 20 mm long.
The JBL Concert A652 may also fit: its published width and height match the A704, but it is 70 mm shorter. This fit has not been tested. Check the M5 mounting-hole alignment and clearances before relying on compatibility.
Printing
Material: PETG (CR PETG)
Nozzle / bed: 250 °C / 80 °C
Layer height: 0.2 mm
Wall loops: 2
Infill: 15% Gyroid