1 / 1
Hobby Washi Tamiya Masking tape holder - Wall Mount — zdjęcie 1

Hobby Washi Tamiya Masking tape holder - Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a wall mount for typical hobby tapes. It fits all my tamiya masking tape, washi tape, graph tape, and electrica

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

This is a wall mount for typical hobby tapes. It fits all my tamiya masking tape, washi tape, graph tape, and electrical tape. It has holes in it so you can use pushpins to hold it to the wall. You can also use command strips, or drill your own hole!

It should be printed in the orientation in the STL.  That is, the "side" down, with the base and spool holder vertical.  I printed it with 10% infill, and 2 walls, with 4 top and bottom layers... and it's working great for me.

Tagi