IKEA KOPPLA Steckdosenleistenhalter – 10" Rack, 1HE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 1U tray for a 10" mini rack that holds the IKEA KOPPLA 3-way power strip with switch (German Schuko version).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 1U tray for a 10" mini rack that holds the IKEA KOPPLA 3-way power strip with switch (German Schuko version). It puts power right inside your homelab rack and keeps the on/off switch reachable from the front.
Features
Fits standard 10" racks, 1U: 254 mm wide, 44.45 mm high, 68 mm deep
Slotted mounting holes in the front panel, so it’s easy to line up with the rack rails
Open tray: the KOPPLA sits snugly, and all three sockets and the switch stay reachable from the front
Cable-tie slots in the tray to strap the power strip down
Cable-tie hole in the front ear to fix the power cord and keep it from being pulled out
Big plugs and USB power adapters fit fine (see photos)
What you need
1× IKEA KOPPLA 3-way power strip with switch (German / Schuko version)
4× rack screws + cage nuts (M6 or M5, depending on your rack)
2–3 small cable ties
Print settings
Material: PETG or ABS/ASA recommended (stiffer and more heat-resistant than PLA); PLA works too
Layer height: 0.2 mm
Walls: 3–4, Infill: 15–20 %
Note: This part only holds a finished, certified power strip. Don’t modify the power strip itself, and check that air can circulate around power adapters.