Freenove ESP32-WROVER Lid with Built-in BOOT Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lid with a flush one-piece BOOT button, 6 mm camera opening and LED slot. STL and STEP included.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Replacement lid only for Flat Badger's Freenove ESP32-Wrover CAM Mount. Use the original model for the case and mount.
The flush 12 x 12 mm pressing area operates BOOT/IO0 through an integral actuator. The button is part of the lid, with no loose insert to fall out. The reset button is not exposed.
Features include a full-thickness 2 mm lid with an 8 mm flexible tongue, a 0.65 mm U-slot, a repositioned 6 mm camera opening, a 0.8 x 7 mm LED window, and twelve rounded spherical retention nibs.
Designed for PETG. Print outside-face-down as supplied. Keep supports, strings and first-layer spread out of the slots. Check that the relatively stiff tongue presses and releases freely.
The actuator reaches 4.3 mm below the flat inside face, leaving 0.3 mm nominal clearance for the measured 4.6 mm switch gap. Check this on your assembly. The latest revision passes digital solid/watertight checks; physical button travel and camera alignment still need a print-fit check.
Includes printable STL and editable STEP with merged coplanar faces and analytic spherical nibs. The preview is a CAD illustration; PRESS is an annotation, not lettering on the part.