Membrane Bass Clarinet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clarinet in C
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by models from "Nkosi Smith" and "Kurnick" (thanks to Jan Jelínek)
The body of the instrument, "baskarinet-28," fits tightly onto the print bed; for smaller print areas, you can use "basklarinet-30" combined with the "prodlouzeni" (extension) and the connecting piece "trubka-30."
The instrument is tuned to the range "C2 – D3" and features keys for F# and Bb. For the membrane, you can use materials such as a piece of a vinyl glove, a small resealable plastic bag, or other similar alternatives. The tone quality and timbre depend directly on the material used and the tension applied via the "trmen-02 (trmen-03)" component; unlike with reed instruments, the player has limited options for adjusting the sound. I recommend starting with the "trubka-30" component and tuning the membrane so that G2 = 98 Hz (with the 4 bottom holes left uncovered). The other components are provided for experimentation. If you choose not to use the keys, the holes can be sealed using the "zatka-2x" component. For the springs in "klapka-05" and "klapka-09," you can use a section of a spring from a ballpoint pen, while 3D-printer filament can serve as the hinge pin. Joints are traditionally sealed using a thick thread. When printing the taller components, an internal brim is sufficient; no supports are required. Use a layer height of 0.2 mm, with 3 perimeters (or 4 perimeters for the main component).
Have fun playing!