1 / 6
Membrane Bass Clarinet — image 1
1 / 6

Membrane Bass Clarinet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clarinet in C

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
22
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution — Noncommercial

Inspired by models from "Nkosi Smith" and "Kurnick" (thanks to Jan Jelínek)

The body of the instrument, "baskarinet-28," fits tightly onto the print bed; for smaller print areas, you can use "basklarinet-30" combined with the "prodlouzeni" (extension) and the connecting piece "trubka-30."

The instrument is tuned to the range "C2 – D3" and features keys for F# and Bb. For the membrane, you can use materials such as a piece of a vinyl glove, a small resealable plastic bag, or other similar alternatives. The tone quality and timbre depend directly on the material used and the tension applied via the "trmen-02 (trmen-03)" component; unlike with reed instruments, the player has limited options for adjusting the sound. I recommend starting with the "trubka-30" component and tuning the membrane so that G2 = 98 Hz (with the 4 bottom holes left uncovered). The other components are provided for experimentation. If you choose not to use the keys, the holes can be sealed using the "zatka-2x" component. For the springs in "klapka-05" and "klapka-09," you can use a section of a spring from a ballpoint pen, while 3D-printer filament can serve as the hinge pin. Joints are traditionally sealed using a thick thread. When printing the taller components, an internal brim is sufficient; no supports are required. Use a layer height of 0.2 mm, with 3 perimeters (or 4 perimeters for the main component).

Have fun playing!

Tags