Dragon Egg Diorama - Dragon Coiled Around Its Egg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dragon wrapped around its scaled egg on a round base. A one-piece fantasy statue that looks amazing in silk PLA.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
My own original design, made with Meshy AI: a dragon coiled around a big scaled egg, with its head on top and its tail wrapped around a round base. It's one solid piece and prints in one go.
I printed mine in gold / red silk PLA on a Prusa CORE One. The silk shine really brings out the scales.
It needs organic supports (build plate only) for the head, claws and tail. Take them off slowly with pliers and a hobby knife. The spikes on the head are thin.
Files included:
- Dragon_Egg_Diorama_150mm.stl - the model at 150 mm tall (about 72 x 71 x 150 mm), ready to slice.
- Dragon_Egg_Diorama.stl - the same model at 50 mm tall, if you want to pick your own size.
- Dragon_Egg_Diorama_150mm_020_COREONE_HF04_SUPPORTED.3mf - my PrusaSlicer project for the Prusa CORE One HF0.4 (150 mm, organic supports).
PRINT SETTINGS (from my PrusaSlicer file):
Printer: Prusa CORE One (0.4 mm high-flow nozzle)
Filament: Gold / red silk PLA (slicer filament profile: Generic PLA Silk @COREONE, 225 C nozzle, 230 C first layer, 60 C bed)
Size: 150 mm tall (about 72 x 71 x 150 mm)
Layer height: 0.20 mm (0.20mm STRUCTURAL FAST custom profile)
Perimeters: 3
Infill: 10% gyroid
Supports: organic, auto-generated, build plate only (overhang threshold 40 degrees)
Brim: none
Slicer estimate: 11 h 17 m, 148 g of filament at 150 mm (PrusaSlicer estimate, normal mode, not a measured print)