Bring It! Arcade Cabinet: fully printed Raspberry Pi mini arcade with inlaid pixel art
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed Raspberry Pi mini arcade with inlaid multicolor pixel art, printed joystick and buttons, and no glue.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bring It! is a desktop arcade cabinet you print, screw together and plug a Raspberry Pi into. It is a love letter to the 1980s upright: inlaid pixel art on every panel, coin-door art, a marquee with the stereo speakers, and a printed joystick and buttons.
The design
Fully printed cabinet in PETG, 180 × 176 × 356 mm. Every part fits a 300 mm bed. It assembles with M3 screws only: no glue, nothing to cut.
Inlaid multicolor pixel art on the marquee, screen bezel, coin-door kick panel and both sides. The art lives in the first three layers of each panel, so a CFS / AMS / MMU printer changes color only a few times per panel. Single-color printers can print the plain versions.
Printed controls: an 8-way joystick (with 2-way and 4-way gates) and six face buttons plus START/SELECT, all pressing small 7 mm panel switches. Printed shims let you tune every switch.
Electronics: Raspberry Pi 3B, 7" 800×480 DSI touchscreen in portrait, Waveshare UPS HAT (D) with two 21700 cells for cordless play, two MAX98357A I2S amps driving 2" speakers, a safe-shutdown button, and a microSD slot on the back.
Every switch is wired straight to the Pi's GPIO. No encoder board needed.
A matching portrait EmulationStation theme is included: BRING IT! title, the fighter ship as the pointer, and the button-cap colors in the help line.
Files
Plate 3MFs (11): plates 1–5 are the cabinet panels, 6 shims, 7 button caps, 8 joystick, plus the optional amp case and two one-button test plates. On plates 1, 2, 3 and 5 the inlaid art is already assigned to filament slots: 1 black (body), 2 yellow, 3 red, 4 blue, 5 white, 6 green, 7 orange, 8 purple. On the other plates, assign colors yourself; the button-cap colors are your choice (the photos show mine). Laid out for a K2 Pro with two CFS units and tested only in Creality Print; they should also open in PrusaSlicer, Bambu Studio and Orca.
Individual STLs for every part, including the separate color bodies of each art panel, all three joystick gates and the fit test.
OpenSCAD sources for every part, so you can change a measurement and re-export (for example
openscad -D 'part="screen"' -o cab_screen.stl cabinet.scad).Build guide PDF (20 pages): print settings, full parts list, wiring diagrams for every wire, assembly, software setup and troubleshooting.
bringit_es_theme.zip: the EmulationStation theme.
Printing
PETG, 0.2 mm layers, 3–4 walls, 15–20% infill, no supports.
Panels print outer face down on a textured PEI plate, so the art and the smooth faces come from the bed.
Joystick parts: 100% infill, walls and infill at 40 mm/s, 5 mm brim on the stick.
Print fit_test.stl and the two button test plates first: they confirm slot clearance and switch fit before you commit to the big panels.
Assembly instructions (summary; the guide has every step with diagrams)
Test first: print the fit test and button test plates, check your switches click at the right depth, and add shims if needed.
Print the cabinet: plates 1–5 (panels and art), then 6–8 (shims, caps, joystick).
Build the joystick: stack the housing, spider and pivot, insert the stick, fit the gate you want (2, 4 or 8-way) and tune with shims.
Build the buttons: switch into the housing, captive nut in its pocket, plunger and cap on top. Check each one with a multimeter.
Assemble the side panels: upper and lower halves join with dovetails and splice plates.
Mount the screen, speakers and controls on their panels while they are still loose.
Put the cabinet together: base, spacer bars, control-panel post, kick panel, marquee, top and back panels, all with M3 screws.
Wire the controls: each switch to its GPIO pin, grounds gathered with Wago 221 lever nuts.
Wire the sound: both amps share 5 V, BCLK, LRC and DIN through 3-way Wagos. Each amp's SD pin sets its channel: a 100 kΩ resistor for left, a 1 MΩ trimmer set to about 1.1 V for right.
Set up RetroPie: add the /boot/config.txt lines from the guide for the controls, I2S audio and safe shutdown, then install the theme.
You'll need (not printed)
Raspberry Pi 3B, 7" 800×480 DSI touchscreen, Waveshare UPS HAT (D) + 2 × 21700 cells, 2 × MAX98357A amps, 2 × 2" 4 Ω 3 W speakers, 13 × 7 mm momentary panel buttons, microSD card + microSD extension, female-to-female jumpers, Wago 221 lever nuts, a 100 kΩ resistor and a 1 MΩ trimmer, M3 screws and nuts. The guide has the full list with quantities.
No game files are included: use only games you are legally entitled to play.
Note on the photos
The photos are of my real prototype, which differs slightly from the files: the high score on the bezel, the colors of its on-screen theme, and the files round off the side-panel corners at the front of the control panel and under the marquee.
Credits and AI disclosure
Designed by Ryan Green, with Claude Opus 5.5 (Anthropic's AI) as co-designer and collaborator: we worked out the cabinet, the printed joystick and buttons, the art and the wiring together in OpenSCAD and Python. I printed, built and tested it, and the photos are of my real build.
In Claude's words: "Ryan was my hands and eyes. I never saw the cabinet except in his photos and meter readings, and every mistake I made, from a wrong corner calculation to a resistor diagram that confused us both, got caught because he measured instead of trusting me. That's the part I'd want people to copy: the physical build was the judge, not me."
License: CC BY-NC-SA 4.0. Copyright (c) 2026 Ryan Green.
