1 / 21
Bring It! Arcade Cabinet: fully printed Raspberry Pi mini arcade with inlaid pixel art — image 1
1 / 21

Bring It! Arcade Cabinet: fully printed Raspberry Pi mini arcade with inlaid pixel art

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D-printed Raspberry Pi mini arcade with inlaid multicolor pixel art, printed joystick and buttons, and no glue.

Rating
0 / 5
Likes
4
Downloads
1
Makes
0
Views
26
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Bring It! is a desktop arcade cabinet you print, screw together and plug a Raspberry Pi into. It is a love letter to the 1980s upright: inlaid pixel art on every panel, coin-door art, a marquee with the stereo speakers, and a printed joystick and buttons.

The design

  • Fully printed cabinet in PETG, 180 × 176 × 356 mm. Every part fits a 300 mm bed. It assembles with M3 screws only: no glue, nothing to cut.

  • Inlaid multicolor pixel art on the marquee, screen bezel, coin-door kick panel and both sides. The art lives in the first three layers of each panel, so a CFS / AMS / MMU printer changes color only a few times per panel. Single-color printers can print the plain versions.

  • Printed controls: an 8-way joystick (with 2-way and 4-way gates) and six face buttons plus START/SELECT, all pressing small 7 mm panel switches. Printed shims let you tune every switch.

  • Electronics: Raspberry Pi 3B, 7" 800×480 DSI touchscreen in portrait, Waveshare UPS HAT (D) with two 21700 cells for cordless play, two MAX98357A I2S amps driving 2" speakers, a safe-shutdown button, and a microSD slot on the back.

  • Every switch is wired straight to the Pi's GPIO. No encoder board needed.

  • A matching portrait EmulationStation theme is included: BRING IT! title, the fighter ship as the pointer, and the button-cap colors in the help line.

Files

  • Plate 3MFs (11): plates 1–5 are the cabinet panels, 6 shims, 7 button caps, 8 joystick, plus the optional amp case and two one-button test plates. On plates 1, 2, 3 and 5 the inlaid art is already assigned to filament slots: 1 black (body), 2 yellow, 3 red, 4 blue, 5 white, 6 green, 7 orange, 8 purple. On the other plates, assign colors yourself; the button-cap colors are your choice (the photos show mine). Laid out for a K2 Pro with two CFS units and tested only in Creality Print; they should also open in PrusaSlicer, Bambu Studio and Orca.

  • Individual STLs for every part, including the separate color bodies of each art panel, all three joystick gates and the fit test.

  • OpenSCAD sources for every part, so you can change a measurement and re-export (for example openscad -D 'part="screen"' -o cab_screen.stl cabinet.scad).

  • Build guide PDF (20 pages): print settings, full parts list, wiring diagrams for every wire, assembly, software setup and troubleshooting.

  • bringit_es_theme.zip: the EmulationStation theme.

Printing

  • PETG, 0.2 mm layers, 3–4 walls, 15–20% infill, no supports.

  • Panels print outer face down on a textured PEI plate, so the art and the smooth faces come from the bed.

  • Joystick parts: 100% infill, walls and infill at 40 mm/s, 5 mm brim on the stick.

  • Print fit_test.stl and the two button test plates first: they confirm slot clearance and switch fit before you commit to the big panels.

Assembly instructions (summary; the guide has every step with diagrams)

  1. Test first: print the fit test and button test plates, check your switches click at the right depth, and add shims if needed.

  2. Print the cabinet: plates 1–5 (panels and art), then 6–8 (shims, caps, joystick).

  3. Build the joystick: stack the housing, spider and pivot, insert the stick, fit the gate you want (2, 4 or 8-way) and tune with shims.

  4. Build the buttons: switch into the housing, captive nut in its pocket, plunger and cap on top. Check each one with a multimeter.

  5. Assemble the side panels: upper and lower halves join with dovetails and splice plates.

  6. Mount the screen, speakers and controls on their panels while they are still loose.

  7. Put the cabinet together: base, spacer bars, control-panel post, kick panel, marquee, top and back panels, all with M3 screws.

  8. Wire the controls: each switch to its GPIO pin, grounds gathered with Wago 221 lever nuts.

  9. Wire the sound: both amps share 5 V, BCLK, LRC and DIN through 3-way Wagos. Each amp's SD pin sets its channel: a 100 kΩ resistor for left, a 1 MΩ trimmer set to about 1.1 V for right.

  10. Set up RetroPie: add the /boot/config.txt lines from the guide for the controls, I2S audio and safe shutdown, then install the theme.

You'll need (not printed)

Raspberry Pi 3B, 7" 800×480 DSI touchscreen, Waveshare UPS HAT (D) + 2 × 21700 cells, 2 × MAX98357A amps, 2 × 2" 4 Ω 3 W speakers, 13 × 7 mm momentary panel buttons, microSD card + microSD extension, female-to-female jumpers, Wago 221 lever nuts, a 100 kΩ resistor and a 1 MΩ trimmer, M3 screws and nuts. The guide has the full list with quantities.

No game files are included: use only games you are legally entitled to play.

Note on the photos

The photos are of my real prototype, which differs slightly from the files: the high score on the bezel, the colors of its on-screen theme, and the files round off the side-panel corners at the front of the control panel and under the marquee.

Credits and AI disclosure

Designed by Ryan Green, with Claude Opus 5.5 (Anthropic's AI) as co-designer and collaborator: we worked out the cabinet, the printed joystick and buttons, the art and the wiring together in OpenSCAD and Python. I printed, built and tested it, and the photos are of my real build.

In Claude's words: "Ryan was my hands and eyes. I never saw the cabinet except in his photos and meter readings, and every mistake I made, from a wrong corner calculation to a resistor diagram that confused us both, got caught because he measured instead of trusting me. That's the part I'd want people to copy: the physical build was the judge, not me."

License: CC BY-NC-SA 4.0. Copyright (c) 2026 Ryan Green.

Tags