1 / 2
Pillow block housing for 6004 bearing (20 mm shaft) — zdjęcie 1
1 / 2

Pillow block housing for 6004 bearing (20 mm shaft)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two-piece pillow block with a bolted cap for a 6004 ball bearing and 20 mm shaft.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
1
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Two-piece pillow block for a 6004 bearing (42 x 20 x 12 mm): a base with mounting feet and a cap held down by two M6 x 30 cap screws. Shaft centre is 40 mm above the mounting face. Good for small conveyors, test rigs and hobby machines.

The bearing seat is a plain through-bore, so add your own retention (collar or a dab of retaining compound). The M6 holes are clearance size, so use nuts or bolt through into your mounting surface. Light-duty use only.

The STEP is the full assembly with bearing, bolts and shaft for reference. Print base feet down and cap flat side down, 0.2 mm layers, PETG, 5 walls, 50% infill.

Designed in code (CadQuery) with AI assistance. Not test-printed by me yet. If you print it, post a make and tell me what to fix.

Tagi