Pillow block housing for 6004 bearing (20 mm shaft)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-piece pillow block with a bolted cap for a 6004 ball bearing and 20 mm shaft.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 1
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Two-piece pillow block for a 6004 bearing (42 x 20 x 12 mm): a base with mounting feet and a cap held down by two M6 x 30 cap screws. Shaft centre is 40 mm above the mounting face. Good for small conveyors, test rigs and hobby machines.
The bearing seat is a plain through-bore, so add your own retention (collar or a dab of retaining compound). The M6 holes are clearance size, so use nuts or bolt through into your mounting surface. Light-duty use only.
The STEP is the full assembly with bearing, bolts and shaft for reference. Print base feet down and cap flat side down, 0.2 mm layers, PETG, 5 walls, 50% infill.
Designed in code (CadQuery) with AI assistance. Not test-printed by me yet. If you print it, post a make and tell me what to fix.
