Hiwi CO2 Regulator Needle Valve Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slip-on cap for the Hiwi CO2 regulator that covers the needle valve so your dosing can’t be changed by accident.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
f you run a pressure regulator on your aquarium, you know how long it takes to dial in the bubble rate. One accidental touch on the needle valve and it’s gone.
This cap slips over the needle valve and covers the adjustment screw, so it can’t be turned by accident while you work on the tank, swap cylinders or clean the cabinet. To adjust the dosing, just pull the cap off.
Designed for and tested on the Hiwi pressure regulator. Other pressure regulators with a similar needle valve may fit, but I haven’t tested them.
And as always: feel free to remix!