1 / 6
Creality SpacePi X4 / X4L - Angled feet (20 deg) — zdjęcie 1
1 / 6

Creality SpacePi X4 / X4L - Angled feet (20 deg)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Angled feet to tilt the Creality Space Pi X4 and X4lL forward by 20 degrees

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Creality SpacePi X4 / X4L - Angled feet (20 deg)

I've got my SpacePi X4L on the top shelf (as it's the best place for it in my setup) - but the viewing angles on the screen are very poor meaning in this position it's barely visible, and I couldn't open the lid fully to load spools, making it really annoying.

So I designed some 20 degree angled feet to tilt it forwads to solve both of these issues.

The rubber feet of the dryer rest in the angled feet - and the weight of it holds itself in place. The stay at the front is strong enough - not unbreakable by any means - but it's there for security/just in case. The weight of the dryer itself and/or the filament in it keeps the weight on the cutout rather than the stay.

Problem solved!

I printed the pictured feet in PETG Basic with 20% Cubic infill because I'm heavy handed and tend to be clumsy but they also print perfectly strong in PLA. When designing I printed at 5% lighning infill and 2 walls with PLA Silk+ and (although hollow and ugly, and not ideal) they still did the job(ish) so play with the infill as you want.

Obviously use common sense, if you play with the model and it breaks loaded with spools and comes crashing down…..not my fault! They aren't the prettiest or most complex (I made it in the slicer) but they are functional. 

Please do post your makes / comments!

Tagi