Skadis Airbrush Holder | Dual Tail Hook Mount - R2R
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed airbrush holder for IKEA SKÅDIS. Uses two modified Tail Hooks for secure storage. Designed and tested by R2R.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Skadis Airbrush Holder | Dual Tail Hook Mount - R2R
A new use for our original R2R Tail Hook, created after a request from our community!
This version is specifically adapted for storing airbrushes on IKEA SKÅDIS pegboards. We added dedicated support notches to the original Tail Hook geometry so the airbrush body can rest more naturally and securely.
HOW IT WORKS
Use two identical hooks for one airbrush.
Mount both hooks on your IKEA SKÅDIS pegboard.
Adjust the spacing depending on your airbrush body.
Rest the airbrush carefully on both supports.
FEATURES
Based on our original R2R Tail Hook.
Redesigned support surface for airbrush storage.
Compact and simple pegboard organization solution.
Two independent hooks allow flexible spacing.
Real print test completed.
TESTED SETUP
Physically tested with a Gaahleri Advanced Seeker.
Printed in PLA.
Tested on Bambu Lab A1.
Profile used: 0.16 mm High Quality.
Two hooks printed together.
PRINT STATS FOR 2 HOOKS
Model weight: 7.30 g
Support weight: 0.11 g
Total weight: 7.40 g
Total filament length: 2.48 m
Model print time: 27m03s
Total time: 34m54s
IMPORTANT
Designed for IKEA SKÅDIS pegboards.
Two printed hooks are required per airbrush.
Compatibility with other airbrush models has not been fully verified yet.
Always check final fit and balance before leaving the airbrush stored unattended.
Designed and tested by Raw2Real (R2R).
REAL SKILLS. REAL IMPACT.