1 / 10
Christmas Doorbell Covers – Reolink — zdjęcie 1
1 / 10

Christmas Doorbell Covers – Reolink

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,43 € – 0,53 € netto (bez VAT)

Dla pliku: 00-fit-test-reolink_COREONE-INDX4T.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,48 € netto (środek widełek).

Masa podana przez autora
10 g
Czas druku podany przez autora
19,2 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A Santa hat, a reindeer and a holly wreath that clip onto a Reolink video doorbell. Nothing covers the camera. PETG.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Checked on a real doorbell. The Santa hat is printed and fitted on my Reolink: the photos at the top are the real thing. Rudolph and the wreath use the same fit but have not been printed yet. Feedback is welcome.

Three Christmas covers for the Reolink Video Doorbell: a Santa hat, Rudolph the reindeer and a holly wreath. They clip on without tools, glue or tape, and come off again in January.

Nothing covers the doorbell

  • The camera, the IR LEDs, the microphone and the button stay clear. The script checks that no part of a cover enters the camera's view (±70° around the lens, more than the 134° × 97° the camera sees) and that nothing sits in front of those parts.

  • Only a 1.8 mm lip rests on the rounded edge of the face.

The covers

  • Santa hat (01-santa-hat): a floppy red hat with a thick rolled fur brim and a pompom, slipped over the top of the doorbell. The brim runs down both sides and rounds off against the wall. One piece, red and white.

  • Rudolph (02-reindeer): a head piece with ears and antlers slides over the top, and a muzzle with a red nose slides over the bottom. Two pieces, brown, white and red.

  • Holly wreath (03-holly-wreath): a frame of holly leaves with red berries and a bow, all around the doorbell. One piece, green and red.

Compatibility

  • Reolink Video Doorbell PoE and WiFi (same housing).

  • Sizes come from the STEP model of the Reolink Video Doorbell PoE by GazB (https://www.printables.com/model/1209667, CC BY). Thank you GazB.

  • Ring and other doorbells are coming: the covers come from a parametric script, so each new doorbell is a new set of measurements.

Print settings

  • PETG only. The covers stay outside in the sun and the cold; PLA warps.

  • 0.2 mm layers, 3 perimeters, 15 % infill. No supports, no brim. Every part prints with its back on the bed, exactly as placed in the 3MF files.

  • On a Core One INDX: Santa hat 1 h 45 (29 g), Rudolph 1 h 55 (37 g), wreath 2 h 10 (52 g).

  • Colour slots: 1 red, 2 white, 3 green, 4 brown.

Fitting

Push the piece onto the doorbell until the lip clips into the joint between the front and the body. Small ribs grip the sides down to the wall, so it does not tip forward. To remove it, pull gently from both sides. The covers sit 1.5 mm off the wall.

Files

  • Model files: 01-santa-hat, 02-reindeer and 03-holly-wreath (3MF, colours set, printer profile included), plus 00-fit-test-reolink.3mf.

  • G-code: ready to print in PETG for Core One INDX 4T and 8T, MK4S MMU3, Core One MMU3 and MINI (single colour). 00-fit-test-reolink is a 19-minute test: three rings with three grip levels and a gauge, to check the fit on your doorbell before printing a full cover.

  • Other files: single-colour and per-colour STL files (zip) and the Python source.

Designed with AI assistance (parametric Python script, source included).

If you print one, I'd love to see a make. I reply to every one.


Français

Vérifié sur une vraie sonnette. Le bonnet est imprimé et posé sur ma Reolink : les premières photos sont de vraies photos. Rudolph et la couronne reprennent le même emboîtement mais ne sont pas encore imprimés. Vos retours sont les bienvenus.

Trois décorations de Noël pour la sonnette Reolink Video Doorbell : un bonnet de Père Noël, Rudolph le renne et une couronne de houx. Elles se clipsent sans outil, sans colle ni adhésif, et s'enlèvent en janvier.

  • Rien ne couvre l'objectif, les LED infrarouges, le micro ni le bouton : le script vérifie que rien n'entre dans le champ de la caméra (±70° autour de l'objectif) ni ne passe devant ces éléments. Seul un rebord de 1,8 mm repose sur le bord arrondi de la face.

  • Bonnet : un bonnet rouge qui retombe, avec un épais bord de fourrure roulé et un pompon, enfilé sur le haut de la sonnette. Le bord descend sur les côtés et s'arrondit contre le mur. Une pièce, rouge et blanc.

  • Rudolph : la tête, avec oreilles et bois, s'enfile sur le haut, et le museau au nez rouge sur le bas. Deux pièces, brun, blanc et rouge.

  • Couronne de houx : un cadre de feuilles de houx avec baies et nœud rouges, tout autour de la sonnette. Une pièce, vert et rouge.

  • Compatible avec la Reolink Video Doorbell PoE et WiFi. Cotes relevées sur le modèle STEP de GazB (Printables 1209667, CC BY), merci à lui. Ring et d'autres modèles arrivent.

  • PETG obligatoire dehors. Couches de 0,2 mm, 3 périmètres, 15 % de remplissage, sans support ni bordure, dos au plateau comme dans les 3MF. G-code prêts pour Core One INDX 4T et 8T, MK4S MMU3, Core One MMU3 et MINI (une couleur).

  • Essai de 19 minutes (00-fit-test, G-code et 3MF) pour vérifier le serrage sur votre sonnette avant d'imprimer une décoration complète. STL et source Python dans les fichiers annexes.

  • Conçu avec l'aide de l'IA (script Python paramétrique fourni).

Si vous en imprimez une, postez une fabrication : je réponds à chacune.

Tagi