1 / 2
Panavise Inspired Vise — zdjęcie 1
1 / 2

Panavise Inspired Vise

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is a little vise guy I designed

Ocena
0 / 5
Polubienia
24
Pobrania
43
Wydruki
0
Wyświetlenia
284
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Here is a panavise model I've been working on. Video shows the assembly.

Print Settings:

I printed my parts out of PETG at 0.3mm layer heights with a 0.4mm nozzle and 4 walls. NO SUPPORTS!

You will need to print one of every STL. Make sure your first layer is good!

Specs:

The vise can open to around 130mm

Jaws are 38mm wide

The main vise screw is a two start 10mm pitch screw, so each turn of the screw moves the jaws 20mm

Hope you all like it!

Tagi