1 / 2
Panavise Inspired Vise
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a little vise guy I designed
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 43
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a panavise model I've been working on. Video shows the assembly.
Print Settings:
I printed my parts out of PETG at 0.3mm layer heights with a 0.4mm nozzle and 4 walls. NO SUPPORTS!
You will need to print one of every STL. Make sure your first layer is good!
Specs:
The vise can open to around 130mm
Jaws are 38mm wide
The main vise screw is a two start 10mm pitch screw, so each turn of the screw moves the jaws 20mm
Hope you all like it!