1 / 5
Draining Soap Dish - Self-Draining Soap Holder with Ribs — zdjęcie 1
1 / 5

Draining Soap Dish - Self-Draining Soap Holder with Ribs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rounded soap tray with arched ribs that keep the bar dry and drain slots between them. Prints flat, no supports.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A rounded soap tray that keeps your bar dry. Nine arched ribs hold the soap up, water runs off to the sides and drips out through eight slots in the floor.

Highlights

  • 116 x 80 x 22 mm, fits a standard bar of soap with room to spare.

  • - Rib tops arch 3 mm higher in the middle, so the bar never sits in a puddle.

  • - Rounded soft-square shape with a chamfered base.

  • - Flat floor and vertical walls: no supports.

  • - Also works as a sponge holder by the kitchen sink.

Print settings

  • Layer height: 0.2 mm, walls: 3, infill: 15 %, supports: none

  • - PETG handles water and soap better than PLA.

  • - About 59 g of filament.

Files: STL and 3MF.

Notes

  • Images are renders of the actual file.

  • - Designed with AI-assisted procedural modeling and checked automatically for printability: watertight mesh, overhang analysis and wall thickness.

  • - Not test-printed yet.

  • - Licensed CC BY-NC-SA: print and remix it for personal use, credit the designer, no commercial use.

Full collection on Cults3D: https://cults3d.com/en/users/aliyalinkilic/3d-models

From the same series on Cults3D: Modular Desk Organizer: https://cults3d.com/en/3d-model/home/modular-desk-organizer-dovetail-pen-holder-bins-trays-set

Tagi