Draining Soap Dish - Self-Draining Soap Holder with Ribs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rounded soap tray with arched ribs that keep the bar dry and drain slots between them. Prints flat, no supports.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A rounded soap tray that keeps your bar dry. Nine arched ribs hold the soap up, water runs off to the sides and drips out through eight slots in the floor.
Highlights
116 x 80 x 22 mm, fits a standard bar of soap with room to spare.
- Rib tops arch 3 mm higher in the middle, so the bar never sits in a puddle.
- Rounded soft-square shape with a chamfered base.
- Flat floor and vertical walls: no supports.
- Also works as a sponge holder by the kitchen sink.
Print settings
Layer height: 0.2 mm, walls: 3, infill: 15 %, supports: none
- PETG handles water and soap better than PLA.
- About 59 g of filament.
Files: STL and 3MF.
Notes
Images are renders of the actual file.
- Designed with AI-assisted procedural modeling and checked automatically for printability: watertight mesh, overhang analysis and wall thickness.
- Not test-printed yet.
- Licensed CC BY-NC-SA: print and remix it for personal use, credit the designer, no commercial use.
Full collection on Cults3D: https://cults3d.com/en/users/aliyalinkilic/3d-models
From the same series on Cults3D: Modular Desk Organizer: https://cults3d.com/en/3d-model/home/modular-desk-organizer-dovetail-pen-holder-bins-trays-set