Gear phone stand (vase mode)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a vase-mode phone stand with variable hold angle.
- Ocena
- 4,833 / 5
- Polubienia
- 28
- Pobrania
- 154
- Wydruki
- 9
- Wyświetlenia
- 1383
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This model was designed to have a fast to print vase-mode phone stand; my main goal was to have one with a variable angle, so I used a gear shape in the two composing parts in order to let them fit in different ways depending on your needs. You should print either: base+full-size stand, or base+2x half size-stand, the second setup allows to have a hole in the middle to plug your charger.
Gcode files and vase mode: gcode files are for PLA, Prusa Mini, .25 layer height, and use a 0.9 line width for perimeters (yep this works well for 0.4 noddles), in order to give some rigidity to the model. I used a single bottom layer in those files, in order to avoid the brim but at the same time speed up printing time.
Non vase-mode print: just print as usually, it will be more robust but will use more time and material of course.
The STL is included in case you want to change size and width.