Gear phone stand (vase mode)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a vase-mode phone stand with variable hold angle.
- Rating
- 4.833 / 5
- Likes
- 28
- Downloads
- 154
- Makes
- 9
- Views
- 1,383
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
This model was designed to have a fast to print vase-mode phone stand; my main goal was to have one with a variable angle, so I used a gear shape in the two composing parts in order to let them fit in different ways depending on your needs. You should print either: base+full-size stand, or base+2x half size-stand, the second setup allows to have a hole in the middle to plug your charger.
Gcode files and vase mode: gcode files are for PLA, Prusa Mini, .25 layer height, and use a 0.9 line width for perimeters (yep this works well for 0.4 noddles), in order to give some rigidity to the model. I used a single bottom layer in those files, in order to avoid the brim but at the same time speed up printing time.
Non vase-mode print: just print as usually, it will be more robust but will use more time and material of course.
The STL is included in case you want to change size and width.