CW2 adapter for Afterburner PCB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little adapter plate to hold a Voron afterburner PCB on the new Clockwork 2/stealthburner.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 184
- Wydruki
- 0
- Wyświetlenia
- 1797
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Little adapter plate to hold a Voron afterburner PCB on the new Clockwork 2/stealthburner.
I designed it to tide me over until I get one of the new stealthburner pcbs.
I used some little Bass m3 standoffs to prop the PCB off the surface of the bracket, but a couple of washers will do the job. The part is designed to accept m3 threads directly into it.
You will also need to replace the top screw which holds the motor in with a longer one.
This also does not allow the cable cover to be used.
Feel free to remix, step file is included.