LINEAR RAIL SPACERS ENDER 5 PLUS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing is meant to be used to make sure your bed carriage is level. You need to print 4 of this part, place one on…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 55
- Wydruki
- 2
- Wyświetlenia
- 627
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This thing is meant to be used to make sure your bed carriage is level. You need to print 4 of this part, place one on each of the 4 guide rods and then move the bed up until there is no gap.
If your z axis moves down when the printer is off, or like me your bl touch was off the bed when you were homing your z axis then you need to re-level your bed carriage. This will help with that.
This spacer is long enough that the stock Ender 5 + hotend will not be able to touch the bed when you tighten the z axis, so no fear of it crashing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2
Infill:
50
Filament: Sunlu PLA+ Black
Category: 3D Printing