LINEAR RAIL SPACERS ENDER 5 PLUS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This thing is meant to be used to make sure your bed carriage is level. You need to print 4 of this part, place one on…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 55
- Makes
- 2
- Views
- 627
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This thing is meant to be used to make sure your bed carriage is level. You need to print 4 of this part, place one on each of the 4 guide rods and then move the bed up until there is no gap.
If your z axis moves down when the printer is off, or like me your bl touch was off the bed when you were homing your z axis then you need to re-level your bed carriage. This will help with that.
This spacer is long enough that the stock Ender 5 + hotend will not be able to touch the bed when you tighten the z axis, so no fear of it crashing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2
Infill:
50
Filament: Sunlu PLA+ Black
Category: 3D Printing