1 / 6
Action camera diver's handle #4 - AussieLand edition
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my best diver camera sole so far! I made the two big slots on the sole to make handle mounting even easier.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (24)Powiązane
This is my best diver camera sole so far!
I made the two big slots on the sole to make handle mounting even easier. To match the rod endpoint diameters with the Dinkum FlexiJoint pieces (30 mm) I have shortened the global length to 238 mm so now it fits to a 200x200 mm build plate if you turn the model 45° in Z.
Can't wait to dive with this beauty :)
Print instructions
To assemble the handle you will need:
In the sole
- 2 pcs 1/4-20 UNC threaded insert (I have used one of these http://www.crosstools.com.au/threaded-inserts-for-plastic%2C-wood%2C-injection---rotomolding.html - the holes are 8 mm in diameter so basically all threaded insert would work, just heat them up with a solering iron and push them in)
- 2 pcs rods with 1/4 UNC screws on both sides (I strongly suggest Dinkum FlexiJoint - just buy a pair from the cheapest one: http://www.dinkumsystems.com/actionpod/ )
- 1 pc UNC 1/4 camera screw like this one: https://www.aliexpress.com/item/Camera-Accessories-UNC1-4-Stainless-steel-Slotted-Tripod-Quick-release-Plate-D-ring-Camera-Screw-for/32862381665.html
In the rods
- 2 pcs 1/4 UNC nuts
- 2 pcs 1/4 UNC bolts (>=18 mm in length)