Liczymy pasujące modele…
Description This is the knife/throwing knife from the game Helldivers 2 Printing: Nozzle : 0.4 mm Layer height : 0.2 PLA supports needed
Wydruk około 4,81 €–5,87 € nettoWstępna wycena jednego wariantu
This is a simple keychain, should fit most standard keyrings. Version 3 is uploaded, with a stronger keyring which should hold up much longer. Please upload any input, makes, comments, as they will decide the future of this very model.
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Rank Badges for the purple upper levels! Check out my other badges For the whole set! I’m putting together a display for them too. Printed at 25%
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Rank Badges for the blue upper levels! Check out my other badges For the whole set! I’m putting together a display for them too. Printed at 25%
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
A 1:12 and 1:48 scale Helldiver miniature! This model is 1 of 20 poses available in the full set of miniatures currently available on the Galactic Armory Patreon until June 1st 2024: https://patreon.com/galacticarmory The full set is also…
I pulled the 3d model from the game and started modeling it, because nobody should have to pay for 3d models here it is, in its unfished glory! A few more edits will be coming, however if someone can get this version to print (I'm getting…
Spread managed democracy across the galaxy and display your allegiance with this Helldiver Dogtag approved for FREE download from the Super Earth Ministry of Truth. The SELLING of this print is NOT APPROVED by the MINISTRY OF ARMED FORCES…
I have found some hard edges that were supposed to be smooth V1.1 addresses most of that. If I find time, I will try to fix the air intake holes, there are many broken triangles hiding inside I have it printed! Scaling it to 1000% was a…
The Model is scaled to MY head. You will need to make your own measurements and scale it to yours. I have a big head so you have been warned. The parts have non manifold edges you will have to right click them and repair them in the…
Eagle back from the nest! Help spread managed democracy throughout the stars, by printing out and assembling this model kit! Based on the Eagle multirole fighter from the video game Helldivers 2 . A fairly detailed model compared to past…
Helldivers skin adapted to Dummy 13 frame. The original Dummy 13 frame is required, with these changes: print two more “frame clavicle v3”. replace the “frame neck” with the “short frame neck” version. replace the “frame hips” with the…
This is the second iteration of my Bile Titan print from Helldivers 2
Plaque for the 500kg Bomb stratagem UPDATE: 3/4/2024: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
I loved the original dog tag so made a variation on the theme using the Hell Commander rank badge. Printed on a Bambu Lab P1S with the 0.08mm extra fine setting, iron top layers.
Collection of 29 Helldiver helmets that were pulled from the game by the hard working folks at The Helldivers Archive! I merely converted the files to STL and fixed some errors for printing. These files may contain errors, and require…
This Collection was pulled from the game by the hard working folks at The Helldivers Archive! I merely converted the files to STL and fixed some errors for printing. These files may contain errors, and require editing. Dropship, Commie…
I have created a simple CAD model of the P - 2 Peacemaker This is my first model in this direction, so I don't have a lot of experience yet I would be very happy about feedback as I said I don't have much experience yet and if there are…
For Democracy! Charger with Behemoth var, Hunter and the dreaded Stalker! This Collection was pulled from the game by the hard working folks at The Helldivers Archive! I merely converted the files to STL and fixed some errors for…
Autocannon, Flamethrower, Autoshotgun, Pistol, LAS-5 Scythe and the Strategem Ball!
Be careful when removing supports on the right arm, it is sort of weak and can break easily.
now you can make the best gun in the game. uses a 1/4 in dowel as support .may need sanding and gluing. Category: Props
Description Helldiver remix using Dummy 13 version 1.0 frame. Much more poseable than the first version and accessories included. Printing: For the frame parts, print with ABS/ASA/PETG. Do not print the frame with PLA. 0.4mm nozzle, layer…
Helldivers 2-Fanart bust Personal fanart work from the game Helldivers 2 There were some deviations when making the model, so I just made it an original armor. But still democracy. Due to different printing environments, the finished…
Wanted to make a helldivers cosplay for comic con, found this great model by ZerekMasters that looked perfect. However it had some problems like too many polygons and other misc. errors. Fixed the models up in OrcaSlicer and sliced them…
Second iteration of my Charger sculpt from Helldivers 2
This is the fan art of B01-Tactical armor from Helldivers2. The item is a .stl file for a chibi character, designed for 3d printing. Feel free to edit and use it as you wish. Also check out the mechs you can sit the little guy in! EXO-45…
Model improved from my previous iteration
Pen holder in Helldivers 2 style.
Liber-tea mug modeled like it's made from a 40mm grenade casing. Did make it a little large (more of a stein than a mug) but it can just be rescaled to whatever size you like.
Plaque for the Orbital Laser stratagem UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
I love the model so much I wanted to gift a printed version to a friend who got me hooked on the game Helldivers 2. To make sure he could fully assemble and display it, I wanted to include the stand in the kit for him. This is the result!…
Accurate logo recreated from scratch in Fusion 360. https://www.arrowheadgamestudios.com/
! The model shown in the picture was painted ! Already print-ready. The parts need to be glued together, while the connector helps to find the right position for gluing.The print plate model is a bit tricky to clean up and there will be a…
Alrighty, this should finally be wearable now! It's a large model that I have no clue how to cut up to be printable that aren't just clean cuts from PrusaSlicer. The fins are exactly the same as they were in the previous version of this…
How 'bout a nice cup of LIBER-TEA?
I wanted to make a small portable phone stand that was always on hand. This is a print in place file, no support required. Set your printer to at least 50% infill and pattern side up. There will be a slight fusion of all moving parts…
helldivers 2 deployment capsule, use it as a coaster, to distribute democracy as it should be with your energy drink or your beer, you have up to 4 coaster redeployments.If the model is accepted, I will make more versions that I think…
Pre-ordered the HD2 themed PS5 controller so I wanted a cool stand for it. Found 2 files by some talented designers and merged them together & this is what I came up with. *Also works with PS4 & Xbox controller, see images. Layer height:…
Firstly, All credit for this model goes to Arrowhead Game Studios & Sony Computer Entertainment My son is a big Helldivers 2 fan and I originally sought and found a model but unfortunately after repeated attempts (printing it upside down)…
Becoming a helldiver shouldn't cost you all your hard earned super credits! So grab your helmet and get into the fight!
Plaque for the Eagle Airstrike stratagem UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
Thigh plate for right leg, mirror model to get the left. Model ripped from the game and cleaned up in blender.
Designed a Hellpod base from scratch in blender and converted it to a PS5 controller stand for my HD2 themed controller. *Also works with PS4 & XBOX controllers. (see pics) This is one of my fist models done in Blender, I feel it turned…
original https://www.thingiverse.com/thing:6503180
A plaque for the Orbital 380mm Barrage UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more accurate to the in game version.
Model courtesy of the excellent folks at the Helldivers archive, uploaded as an STL for your optimal printing experience
Show your elite social status with the Super Citizen dog tag! Printed on Bambu Lab P1S 0.08mm extra fine, top layer ironing.
Some modeling practice I did in Blender, today a Charger from Helldivers 2!
2 models. One for single filament swap, the other one(_3colors.3mf) for 2 swaps.
Simple Helldivers 2 themed keychain. change filament color for last 3 layers, easy peasy
The G-16 impact grenade from Helldivers 2! I tried to model it as accurate as possible, and the size should be correct. If there are issues I will go in and touch it up.
Show off your super elite status, Zim would be proud! Only the very few reach the dizzy heights of Super Private. This is the perfect way to reward your victories over the scourge that plague our Super Earth. I once heard somebody say…
Keycaps for Helldivers 2 strategems Inspired by the plaques of Cysterion
takes some 1/4 in rods for the handle and rod for the hinge. could use 6mm x 2 mm magnets for the mag as the hole is around 6mm/0.24 inch. had a removable mag, and is split for printing. Category: Props
A plaque for the Autocannon support weapon
A plaque for the Orbital Railcannon Strike UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
hell divers 2
This is a simple Helldivers 2 Warbonds plate. Scale to the size you want, very easy as a multicolor print. For freedom and democracy!
HANDLE HAS A FITMENT ISSUE, IT WILL FIT IF YOU SAND OR FIDDLE WITH IT It's almost a 1:1 recreation of the LAS-7 Dagger from the game Helldivers 2. The only detail it's missing is the grip, where I could only manage to make it smooth,…
Helldivers II Mech using Dummy 13 joints and frames
This modified version of my Patriot Exosuit has been updated for quality of life. While it has lost some detail on the back, it should generally be a more pleasant process for folks. Enjoy!
Pencil holder for authentic Helldivers. GLORY FOR SUPER EARTH!!
A fusion of the democratic efforts two other Helldivers who have already produced a cool coaster and a droppod design. The droppod has been redesigned from scratch as a coaster to increase your democratic-mug-stability. Also, the flaps…
help spread democracy across the brick universe, equip your helmet and get in your pod
"How about a nice big cup of Liber-TEA!" been messing around with some different ways to make a helmet stand in fusion, and the helldivers skull insignia can be used in a bunch of different desgins it lends itself to a lot of creative…
Simple Helldivers skull logo. Use as you like. Also easy to use as added accessory ontop of your own prints. I added it to a simple form of a buckle for my upcoming costume.
The modified version of the helldiver helmet, pulled from the game. Does not come with the visor, needs to be created seperately. FYI, in order for the helmet to stick together and not fall apart, the visor is necessary. If there's any…
For Super Earth! G-123 Thermite Grenade Are pesky Hulks turning your squad into paste? Are Shredder tanks treating you like last week’s ration pack? Fear not, Helldiver! The G-123 Thermite Grenade is here to light up the battlefield—and…
Description A 9cm (3.54 inches) diameter coaster inspired by the Skull logo of Helldivers II If you enjoy this model please leave a Like or post a Make , also be sure to check my other models . Thank you! About the model: This is a…
" Cups of Liber-Tea have been issued to every helldiver for morale support " Spread Managed Democracy throughout the galaxy with a cup of Liber-Tea by your side! An up to scale mug able to be printed with your destroyer's 3d printers…
Made the helldivers 2 logo since I enjoy the game. 2 versions depending on preferences. Both with 3 height differences so one can print any preferred colour of democracy. Happy printing!
I built the revolver in pieces to print easier. The grip has an outline to add the texture of gripping if you wanted to. The way I have the STL set up is the best way I find to print. Please contact me if you may have any questions. Have…
I don't have any instructions on how to best print the model
The visor comes with a black film that should be printed in a soft material to make it easier to insert. You can also print the film and use it to cut directly onto another material, such as thin bottle plastic if you dont have soft…
The Helldivers Skull Patch with stripes. 2 version: a simple patch - for like adding to a costume or stuff. a modified version, with a hole-attachment - for wearing as a dogtag.
Scale up or down to whatever size you need. Easy setup for multiple colors.
Summary Edit: I uploaded the repaired version, which is exported from Prusaslicer after running the auto-repair function. Please download that to avoid possibly broken model. Sorry if this caused you any trouble! Tips: See the comment…
The turret can spin! Check the reference image to remove the support pins. The regular-sized one matches the size of my other Helldivers model. Feel free to adjust as you like! The turret is designed to be facing backward for easier…
This is a stencil of the Hell-Divers logo. I'd recommend you print this with a 8-10% infill with some supports.
Design avilable with or without text (on pictures) Assembly available for multi color printers
This is the fan art of EXO-49 Emancipator Exosuit from Helldivers2. The item is a .stl file for a chibi character designed for 3d printing. Feel free to edit and use it as you wish. This model can be used as a vehicle for my earlier…
A plaque for the grenade launcher support weapon
A plaque for the Expendable Anti-tank support weapon
I elevated the areas that need to be white so that you can preform a color change at that layer. Printed well with my Ender 3 V2. With a .2 layer height Black: Layers 1-22 Red: Layers 23-45 White: Layers 46-48
Print settings: Filament: PLA, PETG Layer height: 0,2 Support: no Infill: 100% How 'bout a nice cup of LIBER-TEA?
Have you ever wanted to hunt down dissidents? Now you can. The Truth Enforcers stand as the iron fist of Super Earth’s ideology. They root out lies, silence opposition, and ensure that only one truth survives: the truth of Democracy. To…
split for printing, takes some 1/2 in dowel rods. Category: Props
Keychain of the 500kg Eagle Strike from Helldivers 2. I scaled it to 150% for the picture. I plan to make more.
original SolidWorks files are available, along with 3mf and stl files. supports needed
I made this over a few months from a very basic model from another user, all files are provided, mag and attachments coming soon but haven't printed yet so don't know if fit. the files are for a 1/4 version of the gun but the picture are…
This is a part separated version of my Helldivers 2 patriot exosuit
I would recommend filament swap at 2mm
Rank Badges for the gold ranks sans Skull Admiral! Check out my other badges For the whole set! I’m putting together a display for them too. Also stay tuned I’m currently working on all the badges above Skull Admiral level 60-150 as well!
Update 20240725: Added a resized version that matches the size of the mechs and the helldiver model. This is the fan art of Charger from Helldivers2. This item has a wiggly butt you can fidget with. The item is a .stl file for a chibi…
Helldiver Logo usable as a Keyring. Designed to print with mid print filament change.
TAKES SOME .25 IN DOWELS AND IS SPLIT IN PARTS WITH A REMOVABLE MAG. Category: Props
First 3D model I created from scratch in blender. Took some inspiration from other models and added my own design ques. Although it is not game accurate I feel it came out pretty cool. Wanted to learn some modeling so dove right in &…
I elevated the areas that need to be white so that you can preform a color change at that layer. I Printed the 500KG Bomb remix I did (same thing just different plaque) with my Ender 3 V2. With a .2 layer height Black: Layers 1-22 Red:…
🇬🇧 Small MOLLE Clip – Servant of Freedom (Helldivers Inspired) A small MOLLE clip I designed for my airsoft gear, inspired by the Servant of Freedom player title from Helldivers . Dimensions: 60 × 32.5 × 3 mm (MMU/AMS version) Non-MMU…
This model is based on the emblem from Hell Divers 2, print in a single color or multiple colors for added customization
