1 / 6
Action camera diver's handle #4 - AussieLand edition
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my best diver camera sole so far! I made the two big slots on the sole to make handle mounting even easier.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 0
- Views
- 566
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This is my best diver camera sole so far!
I made the two big slots on the sole to make handle mounting even easier. To match the rod endpoint diameters with the Dinkum FlexiJoint pieces (30 mm) I have shortened the global length to 238 mm so now it fits to a 200x200 mm build plate if you turn the model 45° in Z.
Can't wait to dive with this beauty :)
Print instructions
To assemble the handle you will need:
In the sole
- 2 pcs 1/4-20 UNC threaded insert (I have used one of these http://www.crosstools.com.au/threaded-inserts-for-plastic%2C-wood%2C-injection---rotomolding.html - the holes are 8 mm in diameter so basically all threaded insert would work, just heat them up with a solering iron and push them in)
- 2 pcs rods with 1/4 UNC screws on both sides (I strongly suggest Dinkum FlexiJoint - just buy a pair from the cheapest one: http://www.dinkumsystems.com/actionpod/ )
- 1 pc UNC 1/4 camera screw like this one: https://www.aliexpress.com/item/Camera-Accessories-UNC1-4-Stainless-steel-Slotted-Tripod-Quick-release-Plate-D-ring-Camera-Screw-for/32862381665.html
In the rods
- 2 pcs 1/4 UNC nuts
- 2 pcs 1/4 UNC bolts (>=18 mm in length)