Jaybird X3 Charger Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you, like me, found that your Jaybird X3 headphone charger stopped holding the headphones securely against the…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 251
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
If you, like me, found that your Jaybird X3 headphone charger stopped holding the headphones securely against the pins, then this little clip should solve the issue. My headphones wouldn't seat properly in the original charger, presumably from multiple inserts and removals.
Print Settings
Printer:
Prusa Mini+
Rafts:
No
Supports:
No
Resolution:
draft / speed
Infill:
15
Filament:
Prusament PLA
Black Post-Printing =============
Installing Clip onto Charger
It has a channel for the elastic strap that holds the USB mini cord to the charger. You just pull the charger and cord through the larger end of the clip and it will seat and can stay there permanently.
To charge headphones...
To seat the headphones in the new clip just push or rotate them in place and do the opposite to remove.
Category: Audio