1 / 3
eMaker Huxley Part Cooling Fan Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very small parts print better with a little bit of cooling to stop them overheating and melting. I designed a simple…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Very small parts print better with a little bit of cooling to stop them overheating and melting. I designed a simple bracket to fix the spare fan from my Huxley kit onto the existing bolt on the X-axis idler.
Instructions
- Print the part nice and strong. I used 3 perimeters, 3 base layers and 50% infill. The two vertical lugs needed some additional cooling (now, if only I had a mounted cooling fan).
- Attach the fan to the mount using standard M3 nuts and bolts.
- Replace the M3 bolt through the X-axis idler pulley with a slightly longer one, 25 mm should be plenty.
- Fix the mount to the X idler at a slight downward angle.
- Add a switch to the power supply so that the fan is only on when it is needed.
Category: Other