30 modeli
Model of a coccolith of the phytoplankton Emiliania huxleyi type A, a calcareous alga, based on scanning electron microscope photos. More infos about my work: https://sonnenschauer.net/en/portfolio/emiliania-huxleyi-2/
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
IMPORTANT NOTE! This model has extremely fine details (0.06mm). Professional print services like Shapeways are unable to print it. I don't know how it looks like printed with a normal Resin Printer. If you were able to print it…
my printer came with badly printed gears, i looked for some better ones but they didnt work, so i customized some to work i included the .scad file so you can edit them in openscad i added a file with the drop shaped holes in the large…
derivative of chrille's belt tensioner to fit the eMaker Huxley. Hole pitch 16mm and belt-clamp for T2.5 timing belts. It should also work on the reprappro Huxley Instructions Replace your standard Y-axis belt clamp with this adjustable…
The original design for this comes from the RepRapPro github here: https://github.com/reprappro/Huxley/blob/master/Print-Huxley/Individual-STLs/optional-fan-mount-1off.stl The idea is a big improvement, (in my view), on other designs I…
I am implementing RepRapPro Huxley Duo features to my RepRapPro Huxley based printer. I don't like print cooling fan mount because fan fixing way. Printed pins replaced to nuts and bolts. This is 'dirty hack' :) OpenSCAD was used to…
I wanted to fix the LCD screen to my Huxley in such a way that I could remove and replace it easily. I also needed to power it from the +12V supply from the Sanguinololu board as using the +5V supply was (in my view) causing the 7805…
The Balsa ply bracket on my RRP Huxley started to split over one of the horizontal threaded rods which led me to the git hub repo to find the DXF file which I imported into SCAD and extruded to 6.5mm which is what I measured as the depth…
Buildvolume 150x150x200; laser cuttable on a 400x300mm laser cutter Backstory: Basically this is the end result of me constantly updating my printer: 2011 - reprap huxley kit form eMaker 2012 - update stepper drivers and 2560 Atmega 2013…
Replace the initial part to add a switch. Category: 3D Printer Parts
The awesome smartrap by http://smartfrienz.com . If you have a huxley hotend. 2014-03-15 I took all the parts from http://www.thingiverse.com/thing:177256 except for: http://www.thingiverse.com/thing:271512 which is not needed, but I…
R2 is untested! Mount your Melzi board on top your Z-steppers. Also, it get the USB cable a bit out of the way. The first one was really tight and required a fair bit of filing in the PCB track. Category: 3D Printer Parts
Mount your Huxley on a table without any risk of it falling off. Put the the lock through the hole in the foot and screw it down with M3 screw and nut. I use it with an IKEA PS 2012 table with wheels (article number: 902.084.49 /…
Brackets to mount two pieces of 8mm LED-strip on your RepRap Huxley (and probably other similar RepRap's). As the LED-strip is rated for 12V and Huxley use 18V i used 2 pieces and connected them in series, that means they run at 9V each…
Simple support for embed the Raspberry PI underneath the ReprapPro/eMaker Huxley. Instructions Print each part separately. You'll need to print with a 45º angle to fit into the Huxley heatedbed. Use two M3 screws to fix the Raspberry to…
Demolition Man - Lt. Lenina Huxley - 1993 3D printable model.
Box for the Sanguinololu MCU board, with additional boxes for power input, power switch and lids. Print Settings Printer Brand: Printrbot Printer: Simple Black Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 15% Notes: I…
This is a mash-up of three excellent models with some minor modifications to allow use of an Ubis hot-end tool with a Huxley 3D Printer. Instructions The hot end which originally came with my Huxley printer was always clogging and…
Very small parts print better with a little bit of cooling to stop them overheating and melting. I designed a simple bracket to fix the spare fan from my Huxley kit onto the existing bolt on the X-axis idler. Instructions Print the part…
This is my first attempt at a modification to my printer and I'm pretty pleased with it. I love printing with my Huxley - http://www.thingiverse.com/thing:5631 - but one of the frustrations is the major impact on print quality with even…
The idea is to print a ->Robust<- Spool Holder fitted for huxley (140x140mm bed). I used a lighter to weld parts together. Category: 3D Printer Accessories
heat bed base Huxley for this 120x120 bed: https://www.ebay.es/itm/Aluminum-Heat-Bed-120x120mm-Hot-Bed-12V-with-PCB-Kit-For-3D-Printer/163662839763?hash=item261b10bfd3:g:lesAAOSwkhtcvsHA Category: 3D Printer Parts
Another lm6uu replacement carriage for the badly designed techzone x axis. This one is narrow to keep 140+ mm of travel It use only two LM6UU so make sure the zip tie are secured ! To use it you need to replace the imperial rods by 6mm…
This is an addition to richgain's simple but effective Fan Mount. It allows you to use a second fan on the x-motor side. I found having only a fan blowing from one side of the bed not enough certain prints and wanted a second on blowing…
Replaces the rod holder on one of the huxley's Z axis uprights with a holder with built in mount for a wade's extruder. Designed for use with a bowden cable. Instructions To compile the openscad files, you'll need to download…
This is a thing to hold a microswitch to a 6mm rod. i use them for the Z and Y axes on my reprap huxley (original) Category: 3D Printer Parts
