1 / 3
Huxley Cooling Fan Mount Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an addition to richgain's simple but effective Fan Mount. It allows you to use a second fan on the x-motor side.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is an addition to richgain's simple but effective Fan Mount. It allows you to use a second fan on the x-motor side.
I found having only a fan blowing from one side of the bed not enough certain prints and wanted a second on blowing from the opposite direction. By attaching the fan to the x-motor it moves with the z-axis and will always point towards the newest layer.
The design was made in Tinkercad and is available at https://tinkercad.com/things/1dSwoYOgJ0h
Print instructions
- print this bracket
- print richgain's fan mount (Thing 15899)
- unscrew the top and bottom 16mm M3 screw holding the x-motor
- attach the bracket using two 25mm M3 screws
- attach a 40x40mm fan to the fan mount using M3 nuts and screws, use some washers if the fan blades touch the mount
- attach the fan mount to the bracket using a M3 screw and nut
- wire the fan