1 / 3
Huxley Cooling Fan Mount Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an addition to richgain's simple but effective Fan Mount. It allows you to use a second fan on the x-motor side.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is an addition to richgain's simple but effective Fan Mount. It allows you to use a second fan on the x-motor side.
I found having only a fan blowing from one side of the bed not enough certain prints and wanted a second on blowing from the opposite direction. By attaching the fan to the x-motor it moves with the z-axis and will always point towards the newest layer.
The design was made in Tinkercad and is available at https://tinkercad.com/things/1dSwoYOgJ0h
Print instructions
- print this bracket
- print richgain's fan mount (Thing 15899)
- unscrew the top and bottom 16mm M3 screw holding the x-motor
- attach the bracket using two 25mm M3 screws
- attach a 40x40mm fan to the fan mount using M3 nuts and screws, use some washers if the fan blades touch the mount
- attach the fan mount to the bracket using a M3 screw and nut
- wire the fan