Swan Planter w/ Drainage Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a detailed whooper swan flowerpot I sculpted in blender just because I wanted one, and now you can have one,…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a detailed whooper swan flowerpot I sculpted in blender just because I wanted one, and now you can have one, too!
Print with supports and scale accordingly! This model was sculpted small. The example shown in the photos is 3000x original size for reference. If you scale this up huge, I recommend reducing the size of the drain holes in the bottom as they will scale with the model. At 3000x, they did not need resizing. 3000x should be good for most small succulents, but leafy plants will require a larger size.
Category: Outdoor & Garden