Bra shoulder strap adjusters fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A washing machin has teared my wife bra shoulder strap. Both ring and "eight" were destroyed. The fix was needed -…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 244
- Wydruki
- 3
- Wyświetlenia
- 834
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
A washing machin has teared my wife bra shoulder strap. Both ring and "eight" were destroyed. The fix was needed - infant feeding bra.
Open designs were made to avoid ripping and sawing strap loops - stitches with high load and complicated pattern.
"Eight" must be placed in such orientation that strap end tension will lock cut wedge in the middle bar. Grue might be needed to lock open ring after assembly onto a strap.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
none
Filament: Devil Design PLA Matching strap fabric
Notes:
Print slow, with good bed leveling and first layer distance. For split and open parts tolerances are very small.
It was a reverse engineering of existing parts. A bit thicker in cross section to make printing possible with 0.4 nozzle. All parts ar octagon in cross section to make them support less printable yet working and looking close to genuine parts.
Category: Accessories