Liczymy pasujące modele…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
Ein ganz einfacher Calibration Cube.
This is a simple calibration test cube for your 3D printer with X, Y & Z written on the axis. Print instructions Rafts: No Supports: No Resolution: Infill: 15 Filament_brand: Filament_color: Filament_material:
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle). Be careful when fastening the countersunk screws! I also made a…
Otto, the Calibration Butterfly, is a test model designed for Prusa CORE One+ INDX. We wanted to have a test model that you will not throw away after printing and assessing its quality. It is best to print Otto as a first print, right…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP I’ll be gradually adding colored profiles for the Mini Zoo…
Kryptonite Evolution Mounting Bracket that fits onto the drink holder. Example bike is a Tenways CGO600. Printed in ASA on a sidewinder X1 with a 0.6mm nozzle.
Dimensions are completely parametric. You can define : the filet (D) inner diameter (D) outer diameter (OD) length of the insert (L) outer diameter of the thin part of the flange (D1) outer diameter of the large part of the flange (D2)…
This bracket was designed to support the horizontal divider between the drawers if they become damaged. Often the dividers are damaged where they are secured to the sides and the supplied fixings can not secure them. The bracket is…
This model allows you to use any 1u 10 inch mounting plate as the cross member in the Labrax 10inch rack. This means a smaller printer can be used and also allows for new mounting options at both the top and bottom angled areas. Total…
This bucket is compatible with most Anycubic Kobra printers. I recommend printing it standing up so no supports are needed.
This is a calibration print to test your slicer settings when building the Box Turtle Automated Filament Changer and doubles as a cool fidget toy when you're done! Please check the Discord for more information. If you would like a preview…
This model is compatible with the lego system.
This remix allows you to fit the LIBRA extruder without trimming 2mm off the K1 toolhead carriage, however instead you will need to trim 1mm off the side of the orbiter gearbox housing. Caution. This may allow oil or dirt from the gearbox…
Víčko na plechovku. aby do plechovky nelezl hmyz a bordel :). Pasuje na standardní 0.5L plechovky. Lze tisknout na MMU, AMS a nebo jakékoliv tiskárně s více hlavami
Summary This is a model of a Shelby AC Cobra 427 in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…
Reinforcement/Antivibration bracket for Tenere 700 with TFT dashboard. Designed for www.dr2.cz phone/navigation holders installed with use of mounting kit for World Raid/Rally version (link below).…
This Calibration Cube follows the footsteps of the voron cube and others. Featuring the same size testing bridging, overhangs, small island/stringing, hidden gems, embossed and debossed text. If added a connector its also stackable. info…
I wanted to attach a holder for my favorite build plate cleaner: https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder OnShape CAD Model:…
Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness. BOM is…
NIX63111 Motor mount brace for RC10 Graphite. Fits also NIX91.
just a remix of the headband brace, what I've changed about the headphones is that I've made the joint holes smaller so that it fits the pins better, and also moved it so it can slot into place, made the m3 holes bigger so that you don't…
I built this unique calibration model for you to find the offset of your printer fast with high accuracy . Here are some steps that you are suggested to take to properly measure: print the model out without putting any offset to holes and…
Similar to “The Bait Cave” by maikeru, this is designed to increase the efficiency of a rat trap, in particular the Australian Made, Tiger Brand, Wooden Heavy Duty rat trap. Pretty easy to install with a couple, or four small wood screws.…
In my opinion the original bracket is too thin and I didn't feel comfortable with it. So I opened it in Fusion and made it thicker. The Orbitool 2 toolhead board still fits, only the “outside” is edited. I used these settings and printed…
Since you can't use T-nuts on an Ender 3 V2 Neo to install a lineair rail it's required to drill the X-axis profile This bracket centres the linear rail on the X-axis so it can be drilled correctly. Required tools: hand drill 3.5mm drill…
My wife asked me for a bracelet holder. So I designed this one. Unfortunatly my white went empty, so it has 2 colors on the picture now. It's easy to print with some support material for the holder itself. I printed it with 15% Grid…
Slide this cable management bracket onto your desk and tuck all your cables up under the desk, or along the back of the brackets. Desk can't have a lip or non-uniform top surface as the clip slides onto the edge of the top surface of the…
Fancy bracket for wifi AP or whatever would fit. To attach to the wall. The beams look like they are coming out of the wall due to a collapse. Print Settings Printer Brand: Creality Printer: CR-6 SE **Rafts:** No Supports: Yes…
Replacement caps for Cobra Aquila taps. These little badges are used to indicate hot or cold tap. I couldn't find anywhere I could only buy them, so I made some. They are blank on top, so you can add a H or C to it. I printed them in…
Upravený zadní kryt pro xtouch, pro novejší verzi obrazovky
Originally design as a Bracket to hold long LED lights I bought online under a shelf, but can be used for various things. It slips over a shelf and it has a tightening screw to hold item inside in place. It was design to fit shelves 16mm…
Ever since we started printing with Input Shaper, it has been hard to maintain the nice sheen so many filaments are made for. The MK4 SPEED profile goes up to 170 mm/s leading to matte or mixed finishes. The STRUCTURAL profile only goes…
These brackets are designed to attach sections of EMT (electrical conduit) together for an outdoor project. The OnShape source at…
I downloaded some bracket model long time ago and used it as a source for this one, but I can't find the original link. If you see that it's based on your creation – please let me know, I'll add the link. One screw seems to be enough to…
Tactile/braille dice, can be printed on the bevel (look at the picture), no support needed. Square side 30 mm. The transparent version is petg, scaled 0.66 for 20 mm side. I used a brim.
Small and strong pipe holder for 20mm pipes of all types. Profile feature 3 types of holder with 2 different depths, 1.5cm and 2.5 cm. 1 short, 1 medium and 1 enclosed holder. The mounting holes are 4.5mm. Please print it facing down due…
My printer stand is built from extruded aluminium ftubes and plastic corner joiners. All available cheaply at Bunnings. When the printer gets up to speed the while stand sways back and forward. These brackets make a huge difference in…
A quick fit, 1x1 bracket allowing you to create 90° corner tile multiboards with the quick friction fit connection. Note: This uses Multiboard Tiles and thus their license also applies. Please see https://www.multiboard.io/license
Deckel für Netzteil mit leisen Lüftern Der Unterschied ist enorm, die Lüfter kaum noch hörbar. Umrüstung auf 12V Lüfter 1x Original Anycubic Netzteil Lüfter 1x AAbCooling Slim Silent Lüfter 80mm x 10mm (…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás Nožičky pro Anycubic ACE PRO. Jsou vhodne na vyvyšení ACE. Ja to použím pro lepší chlazeni. Nohy se normalně nacvaknou na riginalni gumvou nohu. Drží pěkně...…
The mounting brackets have 5mm holes for screws. The tenda switch has the following dimensions: - Width: 101 mm - Length: 100 mm - Height: 26,5 mm Happy printing and mounting :)
Good morning, Welcome to my profile, full of models and miniatures :-) I have a catcher for the rest of the filament for you, so that it does not roll all over the printer. It works well and is easy and economical to manufacture. Modeled…
-Learning aid for people without or with low vision. I believe it will be useful to someone :) -If you print out more sets of letters you can start making words and sentences -The cubes are 2x3cm in size and the thickness is 3mm including…
Print with the softest TPU you have and reduce the perimeters and bottom/top walls to as low as possible without ruining the print. There also is a washer included for the screws. Print it four times too.
This holder fits nicely into a solder tip stand such as Aliexpress item 1005001861509937. Prints without supports and should do the job.
This plate can you helps with preparation on beads bracelet Pomůcka na výrobu korálkových náramků
This is a simple cable management bracket. I used it to organize cables in my studio. I used PETG. 0.2 mm layers. With 20% infill and 3 perimeters, the bracket is firm and flexible enough. Check the drawing for the exact measurements.…
Use with caution! I do not guarantee this brake to work for every motorcycle, and it should not be regarded as an extra safety, just a fun model!
Separating trays for reloading brass, pulls out 45, 40, 9mm, and I added the separate 380 version. You want to stack them as they are labeled as follows, from the top down: - 45, 40, 380, 9mm, and base. The trays stack, just pour in the…
I've been using this filter for ages now, and completely forgot to upload the remix I realy like The Filter, but not the lid, as it's a PITA to keep in place as is. So I added locations for 2 threaded inserts and corresponding holes in…
Best printed with standard support, but also possible without supports, brim recommended to avoid warping.
This is a gable mount for the outdoor govee lights square model Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Filament:** Creality PLA, PLA+ white Notes: The gaps are a bit tight. I am sure you could…
Can be printed in whatever material you want. Bronze filament with light coat of blue/grey stain is looking good… The versions in the pictures is printed in eSUN ePLA Metal Antique Brass
Вам понадобятся два вала диаметром 10 мм и уровень для выравнивания платформы.
This is a simple multi-material, low-profile vibration dampener that utilizes thermoplastic polyurethane (TPU). The dampener itself is crafted from TPU for its excellent shock-absorbing properties, while the base is made from PETG,…
This model is compatible with the lego system.
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
Under Desk Mounting Brackets For Kensington SD4700P Docking Station And Its Power Supply. 2 Of Each Part Needs Printing. Needs 8 4x20mm General Purpose Screws.
I always want to wear a poppy for Remembrance Day but always wind up poked by the straight pin versions or end up having them fall off. Last year I lost the backing off the flag pin that I had used to replace the straight pin for a few…
Flush mount design Hidden fasteners to mount the bracket Just press the google unit into place, FRICTION does the rest!!!! (IF your machine runs true to size, just print it.. you MIGHT need to scale in slicer for a tighter fit IF you run…
Wall mounting bracket for a compressor water separator.
We ran out of space on our bookshelf, so now we have to place books in two rows. To make better use of the space, we want to add an extra shelf board a bit lower than the normal book height behind the first row of books. I didn’t want to…
Original document holder must be modified. Use double side tape (or glue) and 4 screw for each side. Print twice (one mirrored) It is for 7 inch 1din radio. Might be used for 2 din (I didn't try it)
Wall holder for Jabra Evolve2 75 Wireless Charger
Hook for Brabantia profile. Print on it's side with supports Material: any except tpu ofcourse lol If you want one for the spacer let me know I left it like this for ease of printing
I've redesigned pfte bracket with fittings I have at home.
Costco Grabber Holder Wall Mount Hanger Bracket Hang Costco Birdrock Home Grabber Tool handle left or right. Print hanger on back, no supports needed. Works with grabbers under 27mm (see pic). Can attach with command strips, or has two…
Do drukarki Anycubic Kobra 2 Neo dołożyłem dodatkową oś Z. Niestety podczas ruchu osi w górę oryginalna oś blokowała się o wzmocnieie osi Z które są ogólnie dostepne w internecie a dodatkowa ruszała się do góry. Powoduje to…
Screen Housing Model for Anycubic Kobra 2 Neo 3D Printer with Integrated OrangePi Zero 2W Board
Decorative shelf bracket Printed in PLA / 0.4mm nozzle / 0.2mm layer height.
An ultimate calibration cube to torture your printer with. Congratulations if you can print it!
I designed this calibration probe to use the leftover 4mm dowels and bushings from a StealthChanger build. It's also built around the hartk1213 sexbolt Z endstop PCB. It works similarly to the sexball probe that is commonly used for…
Paint Strainers with Filter for Airbrash Print heiht 0.2 Apply superglue for attach 190mkm filter.
I had to change out the original reverse camera in my WRX as it did not work with the new Head Unit. I purchased a Natika Backup camera from Amazon, which works well, but the method of installation did not suit me, I did not want to put a…
This bracket can be used to reinforce joints in tables, frames, or other furniture. I printed with PETG. 0.24 layers. 3 walls. 15-25% infill. One side is 7cm long , other 3cm.
This is a bracket for a 3/4 inch French cleat system. Autodesk files included and parameterized for other cleat sizes.
Bracket you can use to mount your cooler to your boat.
This GPU sag bracket was designed to fit between any two fans. This makes it perfect for many fish tank cases, but it was designed specifically for the Antec C5. The base secures into the screw alcoves of the fans and brings my Galax RTX…
The old chrome plated brackets had become more corroded than I realised. I didn't want to drill more holes in the tiles so decided to make brackets to match existing. These are the result using Fusion as usual, apologies regarding the…
Helps holding your Coroplast model in place for your props. Will fit 10mm Coroplast models. Printing: Filament: PLA Infill: 15-20% Nozzle: 0.2mm No supports required
A previous owner had cut out the battery bracket on my stupid little sports car to install an Odyssey PC680. When it came time to replace that battery, I opted to install a Yuasa YTX20HL-BS and drew up this bracket to replace the Odyssey…
Pequeno reparo para tomadas brasileiras, usado principalmente quando o suporte do parafuso quebra e não é mais possível prender a tomada corretamente. É possível modificar a altura para ajustar a diferentes profundidades. Use os reforços…
Part of my collection for furniture: https://www.printables.com/@MichaMietlins_755343/collections/3218237
Additional endstops for Ender 3 with X axis driven by smooth rods from this repo . The endstops should touch the top smooth rod so make sure that hotend is out of the way during alignment. Requires two M4x10 screws and t-nuts pairs and…
My towel rack broke so you know what had to happen!
When using 3d printed sliders like https://www.printables.com/model/890612-sky-team-boardgame-sliders-thin-brim or https://www.printables.com/model/711058-sky-team-board-game-sliders the ice breaking board does no longer fit well. With…
i used pla. obviously no supports
Cable brackets for both a single cable and multiple cables. You can screw these brackets to a surface but also, for example, stick them to a surface with double-sided tape. Set the infill to 100%.
Information Brackets for the more than capable but slightly older CalDigit Dock, the USB C Pro model. Attached are two versions, one for the now discontinued Alex add on unit (monitor shelf with drawers) so it can just be clipped…
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
TPU Voronoi Bracelet Add a unique, modern accessory to your collection with this flexible Voronoi-style bracelet, designed specifically for TPU filament. The lightweight lattice pattern provides excellent flexibility while creating a…
