1 / 1
ZuluSCSI 3.5" Drive Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DECromancer's new 3.5" mounting bracket for ZuluSCSI and SCSI2SD.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
We weren't satisfied with the prior SCSI2SD v6 bracket that had been floating around, so we made a new one for ZuluSCSI and SCSI2SD. Our new bracket:
- Can be used screwlessly. Slide your device into the channel in the front face, then press down. The rear pegs will hold the device in place.
- If you wish, M3x4 or #4x3/16" screws can be added to the holes in the front to secure the board.
- An alternate version with 4 screw holes (and no pegs) is provided (though we don't print these ourselves).
- Is a full 1" high. Amiga users were particularly unhappy about the old bracket's height
We recommend supporting the PCB channel in the centre, along with the SD card and USB holes, as in the provided 3MF file.