1 / 12
Dancing filament guard
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
She likes extrusion that she always has to dance with it. Magnet D8x4mm tested.
- Ocena
- 0 / 5
- Polubienia
- 64
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 1327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (40)Powiązane
The model consists of 4 printed parts (body, jacket, skirt and pin). You also need a magnet D8x4mm. Everything moves smoothly with no resistance.
Assembly (also see photos):
- remove all possible strings
- slide pin into the skirt slot
- insert pin with skirt into the body from the back side (the one that was on the heat bed) and press the lower skirt pin into the body (between legs)
- insert the jacket part so that its tooth is in the skirt slot and press the jacket pin into the body (neck hole)
- glue the magnet (D8x4mm) into the main pin from the front with super-glue (CA glue), glue it directly on the unsupported wrinkled surface
Printing:
All parts are printed without supports with PETG and 0,2mm layerheight (see 3mf file). The unsupported bridging on the pin part is useful for better glue adhesion for magnet.
Tip:
Print, the jacket in other color and pin with skirt as well.
Also check out: