1 / 12
Dancing filament guard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
She likes extrusion that she always has to dance with it. Magnet D8x4mm tested.
- Rating
- 0 / 5
- Likes
- 64
- Downloads
- 79
- Makes
- 0
- Views
- 1,327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
The model consists of 4 printed parts (body, jacket, skirt and pin). You also need a magnet D8x4mm. Everything moves smoothly with no resistance.
Assembly (also see photos):
- remove all possible strings
- slide pin into the skirt slot
- insert pin with skirt into the body from the back side (the one that was on the heat bed) and press the lower skirt pin into the body (between legs)
- insert the jacket part so that its tooth is in the skirt slot and press the jacket pin into the body (neck hole)
- glue the magnet (D8x4mm) into the main pin from the front with super-glue (CA glue), glue it directly on the unsupported wrinkled surface
Printing:
All parts are printed without supports with PETG and 0,2mm layerheight (see 3mf file). The unsupported bridging on the pin part is useful for better glue adhesion for magnet.
Tip:
Print, the jacket in other color and pin with skirt as well.
Also check out: