Desk mount chair Ikea Markus for VR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a hook that can clamp on a Ikea Markus office chair.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 1742
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a hook that can clamp on a Ikea Markus office chair.
You will need this kind of modd of you don't have you're VR camera's your desk.
Therefore moving the desk now with the chair! ;-)
This is till a work in progress and things still have to be improved.
Note that the parts are in the best (strongest) orientations for printing.
I advise to put some double sided tape between the clamps to make sure the clamps don't slide down.
I used M5 screws
If you have any suggestions or improvements please let me/us know!!
If you mount two plugs on the board you can move is back on forth.
Happy printing!
Print instructions
Category: Computer