P
Printables
Ikea Markus armrest
Side mount for Ikea Office chair replacing the side rests. The arm rests was annoying as the prevented the table from getting down to right height.
Wyniki wyszukiwania: markus
Liczymy pasujące modele…
P
Printables
IKEA Markus Rolling Stop with M5 Screw Hole
Modified version of Johannes Hansson's IKEA Markus Rolling Stop with M5 bolt hole added enabling bolting to floor.
P
Printables
IKEA Markus Backrest Latch Hook – Two-Piece Reinforced Upgrade
Исходная версия детали печаталась «поперёк» — линии слоёв шли через наиболее нагруженное место. У меня такой вариант проработал около 4 месяцев и затем сломался по слою. В этой версии я сделал деталь составной . Благодаря этому при печати…
P
Printables
Ikea Markus armrest
My ikea markus armrest disintegrated after 6 years of use. Everything else works perfectly fine so I don't feel like buying a new one just for this. They don't sell replacements so I decided to design and print it myself *It is a two part…
P
Printables
Bicycle Playing Card Inner Tray for Markus_p Card Boxes
I really like @Markus_p's various card boxes based off @whity's Rugged box. It works great for UNO and other cards which are the narrow style. It didn't however work for Bicycle Playing cards and I really wanted to use it for these. Remix…
P
Printables
Bumper for Ikea Markus office chair
I'm using my Markus chair without arm rests, and found the mounting for the arm rests annoying. The bumper help protect the chair and people using them :)
P
Printables
Headphone Holder for IKEA Markus Chair
A great spot to store headphones on your Ikea Markus Chair. In my case -HyperX Cloud II Headphones. SOME ASSEMBLY REQUIRED (see below) Print instructions Suggested 20% infill. 3 Perimeters, 3 Bottom/Top layers. 0.3mm layers to save time.…
P
Printables
Ikea MARKUS chair wheels foot / slippers
After several attempts to replace the legs of my chair with felt glides to avoid damaging the parquet, I came up with this solid model. The aim was to keep the wheels to let them handle the weight transfer constraints with the chair, but…
P
Printables
Adjustable Ikea Markus armrest
This is an adjustable armrest for the Ikea Markus office-chair. It's made of 2 parts, both of which have 5mm holes spaced 10mm apart in the connecting section, so you can screw it together with M5 Bolts (40mm length). There is 1mm…
P
Printables
Ikea Markus Armrest
The original armrests didn't fit my office table so I shortened them. Printed in PETG, 6 perimeters, honeycomb 15% infill. 0 top/bottom layers.
P
Printables
Ikea Markus armrest
Side mount for Ikea Office chair replacing the side rests. The arm rests was annoying as the prevented the table from getting down to right height.
P
Printables
Smaller IKEA Markus Chair Armrest Replacement (Parametric)
I have not printed this, but I only made very small modifications to the last model.
P
Printables
IKEA Markus Hack - Armrest Cover
If you love this chair, but don't like armrests this is the perfect hack for you. This cover hides the open screws for the armrests. No gluing or screwing necessary, the cover is simply pushed onto the two screw holes (A hammer can be…
P
Printables
Ikea Markus lower armrest
This is a custom part for the Ikea Markus office chair. It allows to lower the armrest in order to fit the chair better under the table.
P
Printables
IKEA Markus Armrest Bracket
This bracket lowers the IKEA Markus chair armrests while keeping the original armrests. I made 3 versions with different height profiles. The small version lowers the armest by ~5cm (this is enough for most cases). The medium by about…
P
Printables
IKEA Markus armrest mount cap & fabric clamp
I love the IKEA Markus office chair. Unfortunately, because of the not adjustable armrests and my sitting style, I never mount the armrests and that leads to a very annoying situation: the armrests mounting points remain uncovered and the…
P
Printables
IKEA Markus armrest handles
Like seemingly everyone else who ever bought an IKEA Markus chair, I found the armrests too tall to fit under my desk. Since I felt like I also didn't need armrests(corner desk), I decided to go with simple handles instead. And since I am…
P
Printables
Modular IKEA Markus armrest
Needs the provided bolts and 4 m4 ~1/2cm bolts. Freecad project left for tweaking.
P
Printables
Lightweight ikea markus wheel stop
A small and lightweight 3D printed IKEA Markus chair wheel stopper, to stop the chair from moving around.
P
Printables
IKEA Markus armrest handles (Easier printable remix)
The original armrests on the Markus were not particularly comfortable for me and simply omitting them left me with ugly bolt holes and a hard-to-carry chair. These handles fixed both problems. You can use the original bolts or, if you…
P
Printables
Ikea Markus backrest angle fix
Some Ikea Markus batches seem to have the backrest mounting plate at a slight angle - this results in a slightly laid back position of the backrest even in the most upright setting. This wedge adds 4° of inclination to the backrest,…
P
Printables
Ikea Markus replacement cushion
Replacement TPU cushion for Ikea Markus chair. Allows you to reuse the screw and mount it flat to the chair frame. ⚠ You will need 2 M6 inserts per armrest to screw it to the chair frame. Change the infill method to have different cushion…
P
Printables
IKEA Markus rolling stop
Got a office chair with wheel you want to break and make the chair stand still? This was printed with IKEAs Markus chair as template but I would guess that the same type of wheels are used on other variants as well. Please leave a comment…
P
Printables
IKEA Markus chair handles
IKEA Markus is a great office chair with decent part quality and very long warranty for an attractive price. However, there is one design flaw – the original armrests cannot be adjusted in any way and will most likely hit your desk. If…
P
Printables
IKEA Markus Rolling Stop with M5 Screw Hole
Modified version of Johannes Hansson's IKEA Markus Rolling Stop with M5 bolt hole added enabling bolting to floor.
P
Printables
IKEA Markus Backrest Latch Hook – Two-Piece Reinforced Upgrade
Исходная версия детали печаталась «поперёк» — линии слоёв шли через наиболее нагруженное место. У меня такой вариант проработал около 4 месяцев и затем сломался по слою. В этой версии я сделал деталь составной . Благодаря этому при печати…
P
Printables
Ikea Markus armrest
My ikea markus armrest disintegrated after 6 years of use. Everything else works perfectly fine so I don't feel like buying a new one just for this. They don't sell replacements so I decided to design and print it myself *It is a two part…
P
Printables
Ikea Markus armrest lowering bracket
Reinforced and redesigned Ikea Markus armrest lowering bracket
P
Printables
IKEA MARKUS Foldable Armrest Mod (No Drilling Required)
This mod converts the IKEA MARKUS armrest into a quick-release foldable armrest, making the chair much more comfortable for playing guitar or other instruments while keeping the armrests for normal desk use. The design uses: The original…
P
Printables
Kopfhörerständer / Headphone stand - Markus
Headphone Stand - "Markus" / Kopfhörerständer - "Markus" Wonderful headphone stand personalized with Markus. It is self created and possible to colorize like you wish. Dimensions: 80mm x 80mm x 215mm Printsettings: 0,2mm layer heighth 15%…
P
Printables
OpenScan Benchy - EinscanSP V1.3 by Markus Hartel_raghaus.com
the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/ We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to reach out…
P
Printables
Armrest for Ikea Chair MARKUS
Replacement armrest for the IKEA MARKUS office chair. Available as left and right versions. Designed for 3D printing.
P
Printables
Ikea Markus armrest adjustment
Custom part for ikea markus office chair. It allows you to lower the armrest a bit to make it more ergonomic for the shoulders. The original model was a bit too low for my liking.
P
Printables
Desk mount chair Ikea Markus for VR
I created a hook that can clamp on a Ikea Markus office chair. You will need this kind of modd of you don't have you're VR camera's your desk. Therefore moving the desk now with the chair! ;-) This is till a work in progress and things…
P
Printables
Chair arm accessory clamp (IKEA MARKUS)
I'm just getting into making my own designs, so I just had the random thought of hanging various accessories from the arm of my chair ( for example my driving sim shift stick ) The actual STL is a new version from the one in the little…
P
Printables
NUT JOB remix | Ikea Markus chair bolt
After removing the armrests on the chair, I wanted to protect the threads from dirt. Bolts from holding the armrests where to long to keep in place. So remixed the NUT JOB by Mattala. Excellent work mattala/Mike! Outer diameter 8mm M8…
P
Printables
Markus IKEA Chair Bearing
The nylon bearing on a IKEA Markus chair can break, causing a clunking sound when leaning back and forward. On the bottom of the hydrolic piston is a clip you can remove. Then you can slide the swivel base off to acces the bearing. Print…
P
Printables
Ikea Markus extension mod
An extension mod for Ikea Markus office chair will increase the width of your chair for a more comfortable sitting. You will need longer screws. I used M8x100 for this specific model, but any length will do, you can quickly increase the…
P
Printables
Ikea Markus Armrest lowering bracket
Make the part as strong as possible, use ABS (or PETG), print with 4 Perimeters, 4 top/bottom and >40% infill. If it fails, then under load and the load is, in the worst case, you, leaning on the armrest while sitting down on the chair.
P
Printables
Ikea Markus armrest hole cap
The armrests of my Ikea Markus office got damaged and I needed some caps to hide bolt holes. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Resolution: 160 Infill: 20 Filament: unknown PLA black Notes: Bottom Pattern Initial…
P
Printables
Ikea Markus phone holder (Pixel 6 Pro/7 Pro/8 Pro/9 Pro XL/10 Pro XL)
Ikea Markus Pixel 6 Pro with case (preferably the official one) holder It's a bit wider than the original pixel 6 pro, but it is made for a easier use with cases. The rounded sides allow the edge of the case to prevent the screen from…
P
Printables
Ikea Markus Vapor Storm Eco Mod holder
Vapor Storm Eco mod holder for Ikea Markus chair If you need a support for a different model of e-cig send me the measurements and I will try to satisfy you Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Doesn't Matter…
P
Printables
No Armrests! - Bolt-hole cover for IKEA Markus chair
Redesigned with a chamfer rather than fillet, to improve the printed part quality and remove the need for (most) support when printing. For a different printer, use the STL file. For a PRUSA printer, use the 3mf file. If you want to remix…
P
Printables
Ikea Markus Arm Rest Bolt Hole Caps
I took the armrests off my Ikea Markus office chair and wanted some caps to place over the exposed bolt holes, these solve that problem. Print with 100% infill to avoid snapping with the torque needed to thread them. I printed these in…
P
Printables
IKEA MARKUS Hydraulic repair. Adjustable with shims
Printable piece to lock IKEA's MARKUS chair at a height of 90mm with 5mm shims to adjust to the chairs maximum height of 115mm. Shim shown in grey in photo. Useful if the chairs hydraulics are beginning to fail and the chair drops by…
P
Printables
IKEA Markus Armrest Placeholder Remix
This a remix in done in PrusaSlicer: added a thing hole cover to allow it to be printed standing up. NEEDS Post-processing to punsh through, but prints slightly faster this way. added negative volume to allow the bolts deeper in
P
Printables
IKEA Markus Armrest Cover
Simple armrest cover for IKEA Markus. Holds without screwing something in (if it doesn't scale it a little bit down).
P
Printables
Bicycle Playing Card Inner Tray for Markus_p Card Boxes
I really like @Markus_p's various card boxes based off @whity's Rugged box. It works great for UNO and other cards which are the narrow style. It didn't however work for Bicycle Playing cards and I really wanted to use it for these. Remix…
P
Printables
IKEA Markus armrest
After removing the original armrest there stays the ugly nuts. So I decided to design my own. A few minutes later was the first version done: printing testing, screwed it down fixing, resize the screws holes and make it suport les…
P
Printables
Chair Slider feet (Ikea Markus)
Lower the chair. Use the chair on wooden floors without destroying them.
P
Printables
IKEA Markus arm extension
I modeled this simple spacer for the IKEA Markus seat. It adds approx. 5 cm more width on each side. You need longer screws (M8x80): https://www.amazon.de/gp/product/B078XML5DY Hope this one is helpful to some of you.
P
Printables
Ikea markus screw cover Remix
Remix of the original model, seeing that it did not close completely over the hole, and the thread was too long. The changes are: 2 mm elongated outer area for better sealing 4 mm less thread
P
Printables
Bumper for Ikea Markus office chair
I'm using my Markus chair without arm rests, and found the mounting for the arm rests annoying. The bumper help protect the chair and people using them :)
P
Printables
IKEA Markus Caster Replacement Feet
Replacement Feet for the Ikea Markus chair, recycling the metal rods from the Casters. Two variants are included, one requiring a grommet to provide friction mounting on the metal Stem, another without, which would instead require…
P
Printables
IKEA Markus chair arm
These are smaller arms for the Markus chair to enable it to fit easily under a desk, the final height is 160mm from the bolt centreline. The design is loosely based on Hichi's but reduced to fit on a standard printer with a 250 mm x 200…
P
Printables
Stoppers for leaky Markus office chair gas cylinder
I'll print it in clear PETG with 99% infill. Adjusted the heights to fit my RH Logic 4 chair which is a bit high with the original. Here are 3 different heights with a 1 cm spacer as well.
P
Printables
Office Chair Wheel Stopper (Markus)
I started running sim racing games and I needed a brake for the wheels because I kept rolling away when pressing the brake. After studying the current alternatives, most of which require lifting the wheel, I decided to design my version,…
P
Printables
IKEA Markus armrest screw cover
Screw-in Covers for IKEA Markus chair as replacements for the original armrests. Tired of your Markus chair not fitting under your desk? I present to you this simple yet elegant solution. Printed in Prusament PLA Galaxy Black. Does not…
P
Printables
IKEA Markus Chair Armrest Replacement
Update: Fusion360 File added in case u have to customize it :D BUT Dont Blame me for my poor CAD Skills and the Messy File. ENG: This model is inspired by " TheBuildbay ", which I recreated in CAD and adapted so that armrest pads fit on…
P
Printables
E-Cig holder for Ikea Markus chair
I printed it with these settings and the result was great, but feel free to try others. I suggest printing it on its side to maximize the strength of the anchor point to the chair. layer height 0,2 Infill 20% PETG
P
Printables
Ikea Markus armrest spacer for your fat bum
You will need 4 M8x80 socket screws. You gain about 4cm per side.
P
Printables
Armlehne für Ikea Markus Bürostuhl. 2 Größen
Ersatz für defekte Armlehne des Markus Bürostuhls. Ich habe TPU verwendet.
P
Printables
Stopper for leaky Markus office chair gas cylinder
Too lazy or cheap to buy a replacement gas cilinder for you Ikea Markus? Print this stopper to prevent the dreaded sag. Easy to print and in one piece for you to not waste your time. I printed in PETG to prevent warping with extensive…
P
Printables
Ikea Markus tilt wedge
Wedge that can be installed in the Markus base, gives another 5° of tilt. Can be installed using the default supplied ikea screws. Print instructions Category: Office
P
Printables
Tray for headphone & headset holder by @Markus710
This is a remix of the bottom part of @Markus710 headphone stand, just added a tray.