1 / 2
Patio Umbrella Plug - 74x45mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top portion is 72mm wide, plug part is 45mm wide. Should drop right in. Made this for our glass table.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (11)Powiązane
Our umbrella opening in the patio table had a plug that rotted away - so I needed a replacement. Five minutes in Fusion 360 and I had this nice cap. I made it to fit loose so it drops in easily and can be glued in place with some silicone glue/caulk.