Thermometer Hygrometer Magnetic Mount Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple mount for a common round thermometer hydrometer. There are three versions. Two for use with adhesive…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 145
- Wydruki
- 6
- Wyświetlenia
- 858
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a simple mount for a common round thermometer hydrometer. There are three versions. Two for use with adhesive magnets, one will orient correctly for left and right mounting and the other for top or bottom. The third version is for use with double sided tape. The magnets are a slight interference fit but if you press around the edges they will slip in and that provides a good fit and finish.
They print as positioned in the stl without support. There is one small bridging at the top edge of the magnet inset.
Magnets I used (20x20x2mm) https://www.amazon.com/gp/product/B06XYLCSQ3
Thermometer hydrometer I used https://www.amazon.com/gp/product/B07FCPJRFH
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
300
Infill:
20
Filament: Generic PLA
Category: 3D Printer Accessories