Flat Nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat Nozzle for BOSCH Unlimited Series (6) Cordless Vacuum Cleaner
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to use my BOSCH Series 6 cordless vacuum cleaner to clean my car. For that reason I made this flat nozzle, to reach all the thight areas between the seats.
The model can be printed upright w/o any support material. It was printed it in PLA at 0.3 mm layer height.
I would rocommend to start the print and stop it after about 15 - 20 minutes to test fit the part on your vaccum cleaner, before printig the etire part. If necessary, scale the model in your Slicer in 1% increments to get the right size. The nozzle should stay on the vacuum cleaner just by sliding it on by hand.
Have fun an keep your car clean ;)