Cooler Master NR200P Extension Frame

Frame will give you another 9mm of width. 

Frame V2.0 (TG and metal and radiator mount compatible) 7-part print.
Radiator spacings fixed, they are now precise. Also made holes 4mm big to accomodate Deson m3 screw inserts in radiator mount and top mounts. (https://www.amazon.com/iplusmile-Embedment-Threaded-Printing-Projects/dp/B087NBYF65/ref=sr_1_6?dchild=1&keywords=m3+screw+inserts&qid=1622826397&sr=8-6)

Added possibility to add radiator bracket, please consider screwing down the bottom frame if mounting the bracket.

These 5 parts are needed + 2 of the lower ones.
Nr200P-extension LBC.stl - bottom corner
Nr200P-extension RTC.stl - top corner
Nr200P-extension LTC.stl - top corner
Nr200P-extension BB.stl - bottom bar
Nr200P-extension RBC.stl - bottom corner

If you use Metal panel:
Nr200P-extension LC metal.stl (Updated 2nd of June!)
Nr200P-extension RC Metal.stl (Updated 2nd of June!)

If you use Tempered Glass:
Nr200P-extension LC TG.stl (Updated 2nd of June!)
Nr200P-extension RC TG.stl (Updated 2nd of June!)

I have not left any tollerances in the dove tails. (worked fine for me to snap everything together)

1. Move clips from case onto your newly printed frame.
2. to secure the frame to the case, screw 2x m3 x 12 screws from inside of the chassi through the holes in the top of the case
3. if you are going to mount radiator bracket, please also screw down the bottom bar to the case with 2x m3

If you live in Sweden and want this printed, message me.