Screwin-A-Round Showin' Off (display stand)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display stand for the Screwin-A-Round Extruder Visualizers
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Display stand for the faceplates from the Screwin-A-Round Extruder Visualizer designs. Now, when you're not using one of your faceplates you can still show it off :)
Get your faceplates from the Screwin-A-Round Extruder Visualizer :
https://www.printables.com/model/197559-screwin-a-round-swappable-extruder-visualizer
-One 8x3mm magnet needs to be glued to the inside/back of the stand's post to allow for the visualizer system's magnet post to snap to the front of the stand's post (see picture).
-The stand's post is meant to be snug in the base. No need to push the post all the way down, just push down until it's firmly seated to your liking.
-Easy print. No supports needed.