1 / 9
Case for ElectroCookie Mini PCB Prototype Board
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you print in the orientation provided, you shouldn't need supports. Also included in the photos is my Housing for…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 1233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (16)Powiązane
If you print in the orientation provided, you shouldn't need supports.
Also included in the photos is my Housing for the VL53L0X Time-of-Flight (TOF) sensor.
This case / project box is designed to fit the ElectroCookie Mini PCB Prototype Board is ideal for ESP8266 D1 projects.
- Use short m2.5 screws to attach the PCB to the case
- The smaller case hole is designed to accommodate a 2 pin JST-XH connector (power).
- The larger case hole designed to accommodate a 4 pin JST-XH connector (such as i2c).
- There are holes in the bottom that should accommodate #6 wood screws, in case you want to attach to something.
Update 2022-03-18
- Updated pictures.
- Revised model.
- Tighten lid tolerance a touch. The i2c cable conflicted a bit with the ESP8266, so I moved the i2c hole up a tiny bit and move the PCB slightly lower.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament: Prusament PLA, 1.75 Some awesome green
Category: Tool Holders & Boxes