1 / 9
Case for ElectroCookie Mini PCB Prototype Board
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you print in the orientation provided, you shouldn't need supports. Also included in the photos is my Housing for…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 120
- Makes
- 0
- Views
- 1,233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
If you print in the orientation provided, you shouldn't need supports.
Also included in the photos is my Housing for the VL53L0X Time-of-Flight (TOF) sensor.
This case / project box is designed to fit the ElectroCookie Mini PCB Prototype Board is ideal for ESP8266 D1 projects.
- Use short m2.5 screws to attach the PCB to the case
- The smaller case hole is designed to accommodate a 2 pin JST-XH connector (power).
- The larger case hole designed to accommodate a 4 pin JST-XH connector (such as i2c).
- There are holes in the bottom that should accommodate #6 wood screws, in case you want to attach to something.
Update 2022-03-18
- Updated pictures.
- Revised model.
- Tighten lid tolerance a touch. The i2c cable conflicted a bit with the ESP8266, so I moved the i2c hole up a tiny bit and move the PCB slightly lower.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament: Prusament PLA, 1.75 Some awesome green
Category: Tool Holders & Boxes